And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.496
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.785
And
I accept adding "cowsay" to Additional Software
5.144
And
Additional Software is correctly configured for package "cowsay"
1.012
And
I shutdown Tails and wait for the computer to power off
2.794
And
I start Tails from USB drive "__internal" with network unplugged
36.084
And
I enable persistence
12.959
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
8.264
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.028
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.353
And
I can open the Additional Software configuration window from the notification
2.411
And
I shutdown Tails and wait for the computer to power off
12.671
And
I start Tails from USB drive "__internal" with network unplugged
33.697
And
I enable persistence
12.325
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
7.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051