And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.404
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.599
And
I accept adding "cowsay" to Additional Software
3.900
And
Additional Software is correctly configured for package "cowsay"
0.450
And
I shutdown Tails and wait for the computer to power off
3.881
And
I start Tails from USB drive "__internal" with network unplugged
31.726
And
I enable persistence
10.626
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
7.227
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.022
And
available upgrades have been checked
0.031
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.350
And
I can open the Additional Software configuration window from the notification
2.374
And
I shutdown Tails and wait for the computer to power off
17.484
And
I start Tails from USB drive "__internal" with network unplugged
31.955
And
I enable persistence
11.094
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.319
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048