And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.698
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.653
And
I accept adding "cowsay" to Additional Software
4.786
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
3.841
And
I start Tails from USB drive "__internal" with network unplugged
31.872
And
I enable persistence
10.854
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
6.771
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.025
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.337
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
19.243
And
I start Tails from USB drive "__internal" with network unplugged
33.494
And
I enable persistence
11.548
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
7.941
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046