And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.731
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.320
And
I accept adding "cowsay" to Additional Software
5.101
And
Additional Software is correctly configured for package "cowsay"
0.561
And
I shutdown Tails and wait for the computer to power off
2.601
And
I start Tails from USB drive "__internal" with network unplugged
33.256
And
I enable persistence
11.334
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
8.827
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.027
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.879
And
I can open the Additional Software configuration window from the notification
2.598
And
I shutdown Tails and wait for the computer to power off
17.910
And
I start Tails from USB drive "__internal" with network unplugged
34.346
And
I enable persistence
11.725
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054