And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.701
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.667
And
I accept adding "cowsay" to Additional Software
4.917
And
Additional Software is correctly configured for package "cowsay"
0.559
And
I shutdown Tails and wait for the computer to power off
4.063
And
I start Tails from USB drive "__internal" with network unplugged
33.280
And
I enable persistence
10.802
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
8.380
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.039
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.276
And
I can open the Additional Software configuration window from the notification
2.396
And
I shutdown Tails and wait for the computer to power off
17.809
And
I start Tails from USB drive "__internal" with network unplugged
32.750
And
I enable persistence
10.908
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.509
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059