And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.447
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.380
And
I accept adding "cowsay" to Additional Software
5.049
And
Additional Software is correctly configured for package "cowsay"
0.587
And
I shutdown Tails and wait for the computer to power off
4.059
And
I start Tails from USB drive "__internal" with network unplugged
33.231
And
I enable persistence
11.596
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.036
And
available upgrades have been checked
0.034
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.491
And
I can open the Additional Software configuration window from the notification
2.588
And
I shutdown Tails and wait for the computer to power off
12.817
And
I start Tails from USB drive "__internal" with network unplugged
33.433
And
I enable persistence
11.458
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.278
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063