And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.972
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.510
And
I accept adding "cowsay" to Additional Software
3.989
And
Additional Software is correctly configured for package "cowsay"
0.568
And
I shutdown Tails and wait for the computer to power off
2.607
And
I start Tails from USB drive "__internal" with network unplugged
33.417
And
I enable persistence
11.938
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
7.289
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.036
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.832
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
13.891
And
I start Tails from USB drive "__internal" with network unplugged
32.893
And
I enable persistence
10.614
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.174
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051