And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.212
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.551
And
I accept adding "cowsay" to Additional Software
4.770
And
Additional Software is correctly configured for package "cowsay"
0.512
And
I shutdown Tails and wait for the computer to power off
2.549
And
I start Tails from USB drive "__internal" with network unplugged
33.387
And
I enable persistence
11.414
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.626
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.508
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.025
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.902
And
I can open the Additional Software configuration window from the notification
2.409
And
I shutdown Tails and wait for the computer to power off
12.789
And
I start Tails from USB drive "__internal" with network unplugged
32.503
And
I enable persistence
11.331
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
8.425
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101