And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.182
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.650
And
I accept adding "cowsay" to Additional Software
4.932
And
Additional Software is correctly configured for package "cowsay"
0.705
And
I shutdown Tails and wait for the computer to power off
2.689
And
I start Tails from USB drive "__internal" with network unplugged
34.925
And
I enable persistence
13.233
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
8.979
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.025
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.845
And
I can open the Additional Software configuration window from the notification
2.436
And
I shutdown Tails and wait for the computer to power off
18.137
And
I start Tails from USB drive "__internal" with network unplugged
34.602
And
I enable persistence
11.354
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064