And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.968
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.558
And
I accept adding "cowsay" to Additional Software
4.964
And
Additional Software is correctly configured for package "cowsay"
0.612
And
I shutdown Tails and wait for the computer to power off
4.200
And
I start Tails from USB drive "__internal" with network unplugged
36.293
And
I enable persistence
40.482
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.613
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.143
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.036
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.312
And
I can open the Additional Software configuration window from the notification
2.371
And
I shutdown Tails and wait for the computer to power off
12.850
And
I start Tails from USB drive "__internal" with network unplugged
35.259
And
I enable persistence
12.913
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.081
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.145
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.164
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051