And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.546
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.757
And
I accept adding "cowsay" to Additional Software
5.047
And
Additional Software is correctly configured for package "cowsay"
0.765
And
I shutdown Tails and wait for the computer to power off
4.319
And
I start Tails from USB drive "__internal" with network unplugged
34.528
And
I enable persistence
13.256
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.063
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.923
And
I can open the Additional Software configuration window from the notification
2.575
And
I shutdown Tails and wait for the computer to power off
14.212
And
I start Tails from USB drive "__internal" with network unplugged
33.170
And
I enable persistence
11.515
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.242
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058