And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.272
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.416
And
I accept adding "cowsay" to Additional Software
3.727
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
4.325
And
I start Tails from USB drive "__internal" with network unplugged
36.277
And
I enable persistence
9.685
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
8.802
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.014
And
available upgrades have been checked
3.241
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.423
And
I can open the Additional Software configuration window from the notification
2.530
And
I shutdown Tails and wait for the computer to power off
22.157
And
I start Tails from USB drive "__internal" with network unplugged
36.151
And
I enable persistence
8.920
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.675
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.084
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058