And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.228
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.530
And
I accept adding "cowsay" to Additional Software
4.889
And
Additional Software is correctly configured for package "cowsay"
0.522
And
I shutdown Tails and wait for the computer to power off
2.564
And
I start Tails from USB drive "__internal" with network unplugged
32.999
And
I enable persistence
11.690
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.465
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.027
And
available upgrades have been checked
1.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.326
And
I can open the Additional Software configuration window from the notification
2.611
And
I shutdown Tails and wait for the computer to power off
17.672
And
I start Tails from USB drive "__internal" with network unplugged
33.484
And
I enable persistence
11.763
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.662
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.138
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066