And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.232
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.880
And
I accept adding "cowsay" to Additional Software
5.218
And
Additional Software is correctly configured for package "cowsay"
0.829
And
I shutdown Tails and wait for the computer to power off
4.098
And
I start Tails from USB drive "__internal" with network unplugged
39.392
And
I enable persistence
5.719
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.025
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.017
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
17.755
And
I start Tails from USB drive "__internal" with network unplugged
39.155
And
I enable persistence
7.136
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.604
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068