And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.616
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.441
And
I accept adding "cowsay" to Additional Software
4.876
And
Additional Software is correctly configured for package "cowsay"
0.889
And
I shutdown Tails and wait for the computer to power off
8.534
And
I start Tails from USB drive "__internal" with network unplugged
39.499
And
I enable persistence
6.820
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
11.408
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.022
And
available upgrades have been checked
2.163
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.828
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
12.568
And
I start Tails from USB drive "__internal" with network unplugged
39.850
And
I enable persistence
6.669
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.279
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.048
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067