And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.499
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.912
And
I accept adding "cowsay" to Additional Software
7.073
And
Additional Software is correctly configured for package "cowsay"
1.065
And
I shutdown Tails and wait for the computer to power off
6.594
And
I start Tails from USB drive "__internal" with network unplugged
1:1.876
And
I enable persistence
11.627
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.108
And
I log in to a new session
40.310
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.075
And
available upgrades have been checked
2.493
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.678
And
I can open the Additional Software configuration window from the notification
3.072
And
I shutdown Tails and wait for the computer to power off
19.547
And
I start Tails from USB drive "__internal" with network unplugged
1:4.217
And
I enable persistence
14.623
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
42.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.560
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.110