And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.348
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.972
And
I accept adding "cowsay" to Additional Software
7.729
And
Additional Software is correctly configured for package "cowsay"
0.885
And
I shutdown Tails and wait for the computer to power off
6.472
And
I start Tails from USB drive "__internal" with network unplugged
1:4.046
And
I enable persistence
13.178
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
46.083
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.018
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.216
And
available upgrades have been checked
1.298
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.860
And
I can open the Additional Software configuration window from the notification
3.472
And
I shutdown Tails and wait for the computer to power off
2:2.724
And
I start Tails from USB drive "__internal" with network unplugged
1:2.793
And
I enable persistence
12.885
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
43.628
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.775
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098