And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.232
And
I configure APT to prefer an old version of cowsay
0.093
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.369
And
I accept adding "cowsay" to Additional Software
5.778
And
Additional Software is correctly configured for package "cowsay"
1.004
And
I shutdown Tails and wait for the computer to power off
6.978
And
I start Tails from USB drive "__internal" with network unplugged
1:3.908
And
I enable persistence
12.441
And
I configure APT to prefer an old version of cowsay
0.062
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
42.927
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.461
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.121
And
the network is plugged
0.068
And
available upgrades have been checked
1.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.360
And
I can open the Additional Software configuration window from the notification
2.780
And
I shutdown Tails and wait for the computer to power off
2:2.835
And
I start Tails from USB drive "__internal" with network unplugged
1:6.198
And
I enable persistence
11.376
And
I configure APT to prefer an old version of cowsay
0.062
And
I log in to a new session
43.006
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.560
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.147
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088