And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.010
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.425
And
I accept adding "cowsay" to Additional Software
4.389
And
Additional Software is correctly configured for package "cowsay"
1.042
And
I shutdown Tails and wait for the computer to power off
6.616
And
I start Tails from USB drive "__internal" with network unplugged
1:4.068
And
I enable persistence
12.336
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
39.811
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.068
And
available upgrades have been checked
1.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.709
And
I can open the Additional Software configuration window from the notification
5.090
And
I shutdown Tails and wait for the computer to power off
2:3.947
And
I start Tails from USB drive "__internal" with network unplugged
1:2.203
And
I enable persistence
11.804
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
41.288
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.521
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.248
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102