And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.891
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.696
And
I accept adding "cowsay" to Additional Software
4.311
And
Additional Software is correctly configured for package "cowsay"
1.099
And
I shutdown Tails and wait for the computer to power off
6.597
And
I start Tails from USB drive "__internal" with network unplugged
1:2.042
And
I enable persistence
14.219
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
44.402
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.802
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.096
And
the network is plugged
0.081
And
available upgrades have been checked
0.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.471
And
I can open the Additional Software configuration window from the notification
2.822
And
I shutdown Tails and wait for the computer to power off
2:2.486
And
I start Tails from USB drive "__internal" with network unplugged
1:12.264
And
I enable persistence
13.473
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
43.586
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.870
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079