And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.101
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.098
And
I accept adding "cowsay" to Additional Software
5.069
And
Additional Software is correctly configured for package "cowsay"
0.552
And
I shutdown Tails and wait for the computer to power off
4.151
And
I start Tails from USB drive "__internal" with network unplugged
34.614
And
I enable persistence
11.290
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.415
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.421
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.041
And
available upgrades have been checked
2.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.469
And
I can open the Additional Software configuration window from the notification
2.381
And
I shutdown Tails and wait for the computer to power off
13.307
And
I start Tails from USB drive "__internal" with network unplugged
35.139
And
I enable persistence
10.997
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.772
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064