Cucumber Reports (no 4519) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4519	21 Nov 2023, 13:57

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:55.655	Passed

Tags: @product @not_release_blocker

38.443

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.648

And I temporarily create a 4 GiB disk named "gptfat" 0.056

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.136

And I plug USB drive "gptfat" 2.521

When I start Tails Installer 22.032

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:290 0.980

After features/support/hooks.rb:75 0.001

Tags: @product

34.017

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.428

And I temporarily create a 7200 MiB disk named "temp" 0.064

And I start Tails Installer 22.359

But a suitable USB device is not found 0.027

When I plug USB drive "temp" 2.810

Then the "temp" USB drive is selected 0.102

When I unplug USB drive "temp" 0.200

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:290 0.731

After features/support/hooks.rb:75 0.000

Tags: @product

4:23.032

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.290

And I temporarily create a 7200 MiB disk named "install" 0.064

And I create a gpt partition with a vfat filesystem on disk "install" 5.133

And I plug USB drive "install" 2.465

And I install Tails to USB drive "install" by cloning 3:55.088

Then the running Tails is installed on USB drive "install" 11.902

But there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:290 1.199

After features/support/hooks.rb:75 0.122

Tags: @product

3:55.895

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.361

And I temporarily create a 7200 MiB disk named "install" 0.067

And I plug USB drive "install" 2.800

And I install Tails to USB drive "install" by cloning 3:32.759

Then the running Tails is installed on USB drive "install" 11.818

But there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:290 1.159

After features/support/hooks.rb:75 0.155

Tags: @product

4:36.570

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 19.315

And I create a file in the Persistent directory 0.112

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 5.178

And I plug USB drive "install" 2.511

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.788

Then the running Tails is installed on USB drive "install" 12.680

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 3.854

Hooks

After features/support/hooks.rb:290 1.819

After features/support/hooks.rb:75 0.138

Tags: @product

4:0.670

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.468

And I temporarily create a 7200 MiB disk named "install" 0.348

And I plug USB drive "install" 2.450

And I install Tails to USB drive "install" by cloning 3:31.571

Then the running Tails is installed on USB drive "install" 14.748

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:290 1.887

After features/support/hooks.rb:75 0.112

Tags: @product

4:7.246

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.167

And I have started Tails from DVD without network and logged in 8.808

And I clone USB drive "__internal" to a temporary USB drive "install" 1.367

And I plug USB drive "install" 2.485

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:31.697

Then the running Tails is installed on USB drive "install" 12.627

And there is no persistence partition on USB drive "install" 0.092

Hooks

After features/support/hooks.rb:290 1.138

After features/support/hooks.rb:75 0.139

Tags: @product @uefi

1:47.845

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.224

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:31.296

Then Tails is running from USB drive "__internal" 0.390

And the boot device has safe access rights 3.530

And Tails has started in UEFI mode 0.050

Hooks

After features/support/hooks.rb:290 0.669

After features/support/hooks.rb:75 0.006

Tags: @product

1:39.013

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.392

And I plug and mount a USB drive containing a Tails USB image 30.046

And I create a 7200 MiB disk named "usbimage" 0.053

And I plug USB drive "usbimage" 2.497

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 58.024

Hooks

After features/support/hooks.rb:290 1.226

After features/support/hooks.rb:75 0.099

Tags: @product

1:12.919

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.175

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:11.259

Then Tails is running from USB drive "usbimage" 0.550

And the label of the system partition on "usbimage" is "Tails" 0.213

And the system partition on "usbimage" is an EFI system partition 0.189

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.205

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.089

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.107

And the system partition on "usbimage" has the expected flags 0.128

Hooks

After features/support/hooks.rb:290 0.957

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:55.655	Passed

Feature Report