Cucumber Reports (no 4525) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4525	23 Nov 2023, 17:31

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:14.805	Passed

Tags: @product @not_release_blocker

37.634

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.252

And I temporarily create a 4 GiB disk named "gptfat" 0.058

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.048

And I plug USB drive "gptfat" 2.398

When I start Tails Installer 21.817

Then I am told by Tails Installer that the destination device "is too small" 0.059

Hooks

After features/support/hooks.rb:290 0.978

After features/support/hooks.rb:75 0.001

Tags: @product

33.975

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.708

And I temporarily create a 7200 MiB disk named "temp" 0.049

And I start Tails Installer 21.938

But a suitable USB device is not found 0.064

When I plug USB drive "temp" 2.890

Then the "temp" USB drive is selected 0.104

When I unplug USB drive "temp" 0.201

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:290 0.939

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.765

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.313

And I temporarily create a 7200 MiB disk named "install" 0.060

And I create a gpt partition with a vfat filesystem on disk "install" 5.133

And I plug USB drive "install" 2.430

And I install Tails to USB drive "install" by cloning 3:29.875

Then the running Tails is installed on USB drive "install" 11.884

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:290 1.365

After features/support/hooks.rb:75 0.124

Tags: @product

3:57.975

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.306

And I temporarily create a 7200 MiB disk named "install" 0.057

And I plug USB drive "install" 2.457

And I install Tails to USB drive "install" by cloning 3:34.409

Then the running Tails is installed on USB drive "install" 12.680

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:290 1.176

After features/support/hooks.rb:75 0.131

Tags: @product

4:35.373

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.228

And I create a file in the Persistent directory 0.102

And I temporarily create a 7200 MiB disk named "install" 0.068

And I create a gpt partition with a vfat filesystem on disk "install" 5.108

And I plug USB drive "install" 2.494

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:54.360

Then the running Tails is installed on USB drive "install" 16.899

And there is a persistence partition on USB drive "install" 0.084

And the USB drive "install" contains the same files as my persistent storage 4.028

Hooks

After features/support/hooks.rb:290 2.638

After features/support/hooks.rb:75 0.151

Tags: @product

4:4.768

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.372

And I temporarily create a 7200 MiB disk named "install" 0.066

And I plug USB drive "install" 2.461

And I install Tails to USB drive "install" by cloning 3:31.564

Then the running Tails is installed on USB drive "install" 16.232

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:290 1.821

After features/support/hooks.rb:75 0.140

Tags: @product

4:5.655

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.538

And I have started Tails from DVD without network and logged in 9.556

And I clone USB drive "__internal" to a temporary USB drive "install" 1.456

And I plug USB drive "install" 2.552

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.791

Then the running Tails is installed on USB drive "install" 13.665

And there is no persistence partition on USB drive "install" 0.095

Hooks

After features/support/hooks.rb:290 1.498

After features/support/hooks.rb:75 0.160

Tags: @product @uefi

1:31.939

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.949

And I power off the computer 0.341

And the computer is set to boot in UEFI mode 0.029

When I start Tails from USB drive "__internal" with network unplugged and I login 1:14.216

Then Tails is running from USB drive "__internal" 0.381

And the boot device has safe access rights 3.935

And Tails has started in UEFI mode 0.084

Hooks

After features/support/hooks.rb:290 0.710

After features/support/hooks.rb:75 0.006

Tags: @product

1:39.482

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.910

And I plug and mount a USB drive containing a Tails USB image 30.758

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.404

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 57.366

Hooks

After features/support/hooks.rb:290 2.084

After features/support/hooks.rb:75 0.107

Tags: @product

1:10.234

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.176

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.805

Then Tails is running from USB drive "usbimage" 0.411

And the label of the system partition on "usbimage" is "Tails" 0.168

And the system partition on "usbimage" is an EFI system partition 0.207

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.147

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.117

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.123

And the system partition on "usbimage" has the expected flags 0.075

Hooks

After features/support/hooks.rb:290 0.639

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:14.805	Passed

Feature Report