Cucumber Reports (no 4528) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4528	24 Nov 2023, 00:28

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:52.454	Passed

Tags: @product @not_release_blocker

37.943

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.168

And I temporarily create a 4 GiB disk named "gptfat" 0.032

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.929

And I plug USB drive "gptfat" 2.463

When I start Tails Installer 22.308

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:290 1.172

After features/support/hooks.rb:75 0.001

Tags: @product

33.722

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.155

And I temporarily create a 7200 MiB disk named "temp" 0.032

And I start Tails Installer 22.498

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.733

Then the "temp" USB drive is selected 0.076

When I unplug USB drive "temp" 0.185

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:290 0.720

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.757

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.227

And I temporarily create a 7200 MiB disk named "install" 0.024

And I create a gpt partition with a vfat filesystem on disk "install" 5.059

And I plug USB drive "install" 2.428

And I install Tails to USB drive "install" by cloning 3:30.069

Then the running Tails is installed on USB drive "install" 11.859

But there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:290 1.217

After features/support/hooks.rb:75 0.129

Tags: @product

3:54.087

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.368

And I temporarily create a 7200 MiB disk named "install" 0.029

And I plug USB drive "install" 2.456

And I install Tails to USB drive "install" by cloning 3:31.511

Then the running Tails is installed on USB drive "install" 11.640

But there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:290 1.324

After features/support/hooks.rb:75 0.131

Tags: @product

4:20.012

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.786

And I create a file in the Persistent directory 0.105

And I temporarily create a 7200 MiB disk named "install" 0.051

And I create a gpt partition with a vfat filesystem on disk "install" 5.040

And I plug USB drive "install" 2.550

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:43.392

Then the running Tails is installed on USB drive "install" 14.028

And there is a persistence partition on USB drive "install" 0.081

And the USB drive "install" contains the same files as my persistent storage 3.976

Hooks

After features/support/hooks.rb:290 2.479

After features/support/hooks.rb:75 0.145

Tags: @product

4:0.465

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.554

And I temporarily create a 7200 MiB disk named "install" 0.031

And I plug USB drive "install" 2.436

And I install Tails to USB drive "install" by cloning 3:31.384

Then the running Tails is installed on USB drive "install" 14.987

And there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:290 2.235

After features/support/hooks.rb:75 0.112

Tags: @product

4:23.601

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.615

And I have started Tails from DVD without network and logged in 8.718

And I clone USB drive "__internal" to a temporary USB drive "install" 1.382

And I plug USB drive "install" 2.484

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:49.857

Then the running Tails is installed on USB drive "install" 11.463

And there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:290 1.236

After features/support/hooks.rb:75 0.141

Tags: @product @uefi

1:32.946

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.265

And I power off the computer 0.319

And the computer is set to boot in UEFI mode 0.020

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.112

Then Tails is running from USB drive "__internal" 0.430

And the boot device has safe access rights 3.721

And Tails has started in UEFI mode 0.075

Hooks

After features/support/hooks.rb:290 0.629

After features/support/hooks.rb:75 0.005

Tags: @product

1:22.684

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.359

And I plug and mount a USB drive containing a Tails USB image 30.752

And I create a 7200 MiB disk named "usbimage" 0.032

And I plug USB drive "usbimage" 2.466

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 41.073

Hooks

After features/support/hooks.rb:290 1.473

After features/support/hooks.rb:75 0.103

Tags: @product

1:9.234

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.110

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.832

Then Tails is running from USB drive "usbimage" 0.420

And the label of the system partition on "usbimage" is "Tails" 0.166

And the system partition on "usbimage" is an EFI system partition 0.261

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.168

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.084

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.097

And the system partition on "usbimage" has the expected flags 0.092

Hooks

After features/support/hooks.rb:290 0.650

After features/support/hooks.rb:75 0.018

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:52.454	Passed

Feature Report