Cucumber Reports (no 4532) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4532	25 Nov 2023, 12:32

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:26.192	Passed

Tags: @product @not_release_blocker

38.438

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.508

And I temporarily create a 4 GiB disk named "gptfat" 0.046

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.195

And I plug USB drive "gptfat" 2.475

When I start Tails Installer 22.164

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:291 1.094

After features/support/hooks.rb:75 0.001

Tags: @product

34.405

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.946

And I temporarily create a 7200 MiB disk named "temp" 0.057

And I start Tails Installer 22.236

But a suitable USB device is not found 0.026

When I plug USB drive "temp" 2.802

Then the "temp" USB drive is selected 0.095

When I unplug USB drive "temp" 0.214

Then a suitable USB device is not found 0.027

Hooks

After features/support/hooks.rb:291 0.862

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.289

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.496

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 5.227

And I plug USB drive "install" 2.460

And I install Tails to USB drive "install" by cloning 3:28.627

Then the running Tails is installed on USB drive "install" 12.315

But there is no persistence partition on USB drive "install" 0.108

Hooks

After features/support/hooks.rb:291 1.158

After features/support/hooks.rb:75 0.139

Tags: @product

3:55.538

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.606

And I temporarily create a 7200 MiB disk named "install" 0.071

And I plug USB drive "install" 2.448

And I install Tails to USB drive "install" by cloning 3:32.333

Then the running Tails is installed on USB drive "install" 12.009

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.075

After features/support/hooks.rb:75 0.126

Tags: @product

4:31.656

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.569

And I create a file in the Persistent directory 0.165

And I temporarily create a 7200 MiB disk named "install" 0.089

And I create a gpt partition with a vfat filesystem on disk "install" 4.350

And I plug USB drive "install" 2.478

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.026

Then the running Tails is installed on USB drive "install" 14.963

And there is a persistence partition on USB drive "install" 0.069

And the USB drive "install" contains the same files as my persistent storage 3.944

Hooks

After features/support/hooks.rb:291 2.277

After features/support/hooks.rb:75 0.148

Tags: @product

4:2.952

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.737

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.451

And I install Tails to USB drive "install" by cloning 3:31.126

Then the running Tails is installed on USB drive "install" 16.495

And there is no persistence partition on USB drive "install" 0.085

Hooks

After features/support/hooks.rb:291 2.087

After features/support/hooks.rb:75 0.120

Tags: @product

4:10.615

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.096

And I have started Tails from DVD without network and logged in 9.389

And I clone USB drive "__internal" to a temporary USB drive "install" 1.234

And I plug USB drive "install" 2.519

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:33.716

Then the running Tails is installed on USB drive "install" 13.577

And there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.180

After features/support/hooks.rb:75 0.155

Tags: @product @uefi

1:31.812

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.272

And I power off the computer 0.333

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:15.959

Then Tails is running from USB drive "__internal" 0.382

And the boot device has safe access rights 3.760

And Tails has started in UEFI mode 0.078

Hooks

After features/support/hooks.rb:291 0.656

After features/support/hooks.rb:75 0.008

Tags: @product

1:47.943

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.280

And I plug and mount a USB drive containing a Tails USB image 29.618

And I create a 7200 MiB disk named "usbimage" 0.085

And I plug USB drive "usbimage" 2.467

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:7.492

Hooks

After features/support/hooks.rb:291 2.449

After features/support/hooks.rb:75 0.108

Tags: @product

1:15.538

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.307

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:13.682

Then Tails is running from USB drive "usbimage" 0.533

And the label of the system partition on "usbimage" is "Tails" 0.238

And the system partition on "usbimage" is an EFI system partition 0.278

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.194

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.103

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.099

And the system partition on "usbimage" has the expected flags 0.100

Hooks

After features/support/hooks.rb:291 0.697

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:26.192	Passed

Feature Report