Cucumber Reports (no 4538) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4538	28 Nov 2023, 00:16

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:57.352	Passed

Tags: @product @not_release_blocker

35.782

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.995

And I temporarily create a 4 GiB disk named "gptfat" 0.047

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.979

And I plug USB drive "gptfat" 2.416

When I start Tails Installer 21.290

Then I am told by Tails Installer that the destination device "is too small" 0.053

Hooks

After features/support/hooks.rb:291 0.898

After features/support/hooks.rb:75 0.001

Tags: @product

33.452

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.142

And I temporarily create a 7200 MiB disk named "temp" 0.040

And I start Tails Installer 22.322

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.635

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.175

Then a suitable USB device is not found 0.029

Hooks

After features/support/hooks.rb:291 0.705

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.955

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.139

And I temporarily create a 7200 MiB disk named "install" 0.132

And I create a gpt partition with a vfat filesystem on disk "install" 5.179

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:30.842

Then the running Tails is installed on USB drive "install" 11.145

But there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 1.129

After features/support/hooks.rb:75 0.134

Tags: @product

3:50.626

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.199

And I temporarily create a 7200 MiB disk named "install" 0.050

And I plug USB drive "install" 2.435

And I install Tails to USB drive "install" by cloning 3:28.476

Then the running Tails is installed on USB drive "install" 11.391

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.145

After features/support/hooks.rb:75 0.126

Tags: @product

4:28.788

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.777

And I create a file in the Persistent directory 0.086

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 5.185

And I plug USB drive "install" 2.433

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.127

Then the running Tails is installed on USB drive "install" 13.181

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.885

Hooks

After features/support/hooks.rb:291 2.444

After features/support/hooks.rb:75 0.136

Tags: @product

4:3.045

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.288

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:32.713

Then the running Tails is installed on USB drive "install" 15.486

And there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 1.782

After features/support/hooks.rb:75 0.138

Tags: @product

4:2.680

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.831

And I have started Tails from DVD without network and logged in 8.701

And I clone USB drive "__internal" to a temporary USB drive "install" 1.175

And I plug USB drive "install" 2.443

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.051

Then the running Tails is installed on USB drive "install" 12.386

And there is no persistence partition on USB drive "install" 0.090

Hooks

After features/support/hooks.rb:291 1.279

After features/support/hooks.rb:75 0.094

Tags: @product @uefi

1:42.783

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.012

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.024

And I power off the computer 0.322

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.799

Then Tails is running from USB drive "__internal" 0.376

And the boot device has safe access rights 3.171

And Tails has started in UEFI mode 0.062

Hooks

After features/support/hooks.rb:291 0.876

After features/support/hooks.rb:75 0.006

Tags: @product

1:35.341

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.949

And I plug and mount a USB drive containing a Tails USB image 29.705

And I create a 7200 MiB disk named "usbimage" 0.076

And I plug USB drive "usbimage" 2.420

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 54.189

Hooks

After features/support/hooks.rb:291 1.827

After features/support/hooks.rb:75 0.097

Tags: @product

1:6.897

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.153

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.429

Then Tails is running from USB drive "usbimage" 0.363

And the label of the system partition on "usbimage" is "Tails" 0.210

And the system partition on "usbimage" is an EFI system partition 0.198

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.206

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.096

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.092

And the system partition on "usbimage" has the expected flags 0.147

Hooks

After features/support/hooks.rb:291 0.679

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:57.352	Passed

Feature Report