Cucumber Reports (no 4539) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4539	28 Nov 2023, 12:48

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:10.580	Passed

Tags: @product @not_release_blocker

38.040

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.380

And I temporarily create a 4 GiB disk named "gptfat" 0.052

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.978

And I plug USB drive "gptfat" 2.399

When I start Tails Installer 22.163

Then I am told by Tails Installer that the destination device "is too small" 0.066

Hooks

After features/support/hooks.rb:291 0.911

After features/support/hooks.rb:75 0.001

Tags: @product

33.781

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.384

And I temporarily create a 7200 MiB disk named "temp" 0.323

And I start Tails Installer 21.948

But a suitable USB device is not found 0.035

When I plug USB drive "temp" 2.796

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.187

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.949

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.744

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.621

And I temporarily create a 7200 MiB disk named "install" 0.038

And I create a gpt partition with a vfat filesystem on disk "install" 5.160

And I plug USB drive "install" 2.405

And I install Tails to USB drive "install" by cloning 3:30.417

Then the running Tails is installed on USB drive "install" 11.007

But there is no persistence partition on USB drive "install" 0.093

Hooks

After features/support/hooks.rb:291 1.253

After features/support/hooks.rb:75 0.126

Tags: @product

3:51.076

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.715

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.414

And I install Tails to USB drive "install" by cloning 3:28.502

Then the running Tails is installed on USB drive "install" 11.303

But there is no persistence partition on USB drive "install" 0.096

Hooks

After features/support/hooks.rb:291 1.241

After features/support/hooks.rb:75 0.129

Tags: @product

4:37.636

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.098

And I create a file in the Persistent directory 0.083

And I temporarily create a 7200 MiB disk named "install" 0.044

And I create a gpt partition with a vfat filesystem on disk "install" 5.189

And I plug USB drive "install" 2.471

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:54.699

Then the running Tails is installed on USB drive "install" 17.132

And there is a persistence partition on USB drive "install" 0.133

And the USB drive "install" contains the same files as my persistent storage 5.784

Hooks

After features/support/hooks.rb:291 1.673

After features/support/hooks.rb:75 0.143

Tags: @product

4:2.090

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.462

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.535

And I install Tails to USB drive "install" by cloning 3:32.395

Then the running Tails is installed on USB drive "install" 15.556

And there is no persistence partition on USB drive "install" 0.094

Hooks

After features/support/hooks.rb:291 2.040

After features/support/hooks.rb:75 0.149

Tags: @product

4:4.039

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.026

And I have started Tails from DVD without network and logged in 8.754

And I clone USB drive "__internal" to a temporary USB drive "install" 1.132

And I plug USB drive "install" 2.508

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.642

Then the running Tails is installed on USB drive "install" 11.875

And there is no persistence partition on USB drive "install" 0.101

Hooks

After features/support/hooks.rb:291 1.252

After features/support/hooks.rb:75 0.127

Tags: @product @uefi

1:40.084

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.925

And I power off the computer 0.350

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:23.955

Then Tails is running from USB drive "__internal" 0.325

And the boot device has safe access rights 3.426

And Tails has started in UEFI mode 0.069

Hooks

After features/support/hooks.rb:291 0.868

After features/support/hooks.rb:75 0.006

Tags: @product

1:36.705

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.231

And I plug and mount a USB drive containing a Tails USB image 29.778

And I create a 7200 MiB disk named "usbimage" 0.051

And I plug USB drive "usbimage" 2.403

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.239

Hooks

After features/support/hooks.rb:291 1.695

After features/support/hooks.rb:75 0.099

Tags: @product

1:9.381

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.218

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.841

Then Tails is running from USB drive "usbimage" 0.408

And the label of the system partition on "usbimage" is "Tails" 0.185

And the system partition on "usbimage" is an EFI system partition 0.258

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.179

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.097

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.096

And the system partition on "usbimage" has the expected flags 0.096

Hooks

After features/support/hooks.rb:291 0.709

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:10.580	Passed

Feature Report