Cucumber Reports (no 4558) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4558	07 Dec 2023, 20:51

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:0.553	Passed

Tags: @product @not_release_blocker

39.246

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.959

And I temporarily create a 4 GiB disk named "gptfat" 0.171

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.410

And I plug USB drive "gptfat" 2.520

When I start Tails Installer 22.136

Then I am told by Tails Installer that the destination device "is too small" 0.046

Hooks

After features/support/hooks.rb:291 0.920

After features/support/hooks.rb:75 0.001

Tags: @product

35.272

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.994

And I temporarily create a 7200 MiB disk named "temp" 0.025

And I start Tails Installer 24.173

But a suitable USB device is not found 0.027

When I plug USB drive "temp" 2.735

Then the "temp" USB drive is selected 0.103

When I unplug USB drive "temp" 0.183

Then a suitable USB device is not found 0.029

Hooks

After features/support/hooks.rb:291 0.703

After features/support/hooks.rb:75 0.000

Tags: @product

3:58.684

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.978

And I temporarily create a 7200 MiB disk named "install" 0.033

And I create a gpt partition with a vfat filesystem on disk "install" 5.065

And I plug USB drive "install" 2.409

And I install Tails to USB drive "install" by cloning 3:30.815

Then the running Tails is installed on USB drive "install" 12.301

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.222

After features/support/hooks.rb:75 0.153

Tags: @product

3:50.549

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.432

And I temporarily create a 7200 MiB disk named "install" 0.046

And I plug USB drive "install" 2.468

And I install Tails to USB drive "install" by cloning 3:28.295

Then the running Tails is installed on USB drive "install" 11.255

But there is no persistence partition on USB drive "install" 0.051

Hooks

After features/support/hooks.rb:291 1.176

After features/support/hooks.rb:75 0.140

Tags: @product

4:31.463

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.228

And I create a file in the Persistent directory 0.073

And I temporarily create a 7200 MiB disk named "install" 0.034

And I create a gpt partition with a vfat filesystem on disk "install" 5.090

And I plug USB drive "install" 2.451

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.055

Then the running Tails is installed on USB drive "install" 15.521

And there is a persistence partition on USB drive "install" 0.050

And the USB drive "install" contains the same files as my persistent storage 3.957

Hooks

After features/support/hooks.rb:291 2.013

After features/support/hooks.rb:75 0.155

Tags: @product

4:6.417

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.772

And I temporarily create a 7200 MiB disk named "install" 0.036

And I plug USB drive "install" 2.489

And I install Tails to USB drive "install" by cloning 3:34.138

Then the running Tails is installed on USB drive "install" 18.898

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.662

After features/support/hooks.rb:75 0.119

Tags: @product

4:5.796

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.526

And I have started Tails from DVD without network and logged in 8.743

And I clone USB drive "__internal" to a temporary USB drive "install" 1.271

And I plug USB drive "install" 2.440

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:30.082

Then the running Tails is installed on USB drive "install" 13.671

And there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.227

After features/support/hooks.rb:75 0.158

Tags: @product @uefi

1:38.269

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.704

And I power off the computer 0.326

And the computer is set to boot in UEFI mode 0.018

When I start Tails from USB drive "__internal" with network unplugged and I login 1:21.910

Then Tails is running from USB drive "__internal" 0.420

And the boot device has safe access rights 3.829

And Tails has started in UEFI mode 0.059

Hooks

After features/support/hooks.rb:291 0.660

After features/support/hooks.rb:75 0.039

Tags: @product

1:22.787

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.571

And I plug and mount a USB drive containing a Tails USB image 30.514

And I create a 7200 MiB disk named "usbimage" 0.023

And I plug USB drive "usbimage" 2.466

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 41.211

Hooks

After features/support/hooks.rb:291 1.385

After features/support/hooks.rb:75 0.107

Tags: @product

1:12.065

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.126

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:10.421

Then Tails is running from USB drive "usbimage" 0.582

And the label of the system partition on "usbimage" is "Tails" 0.232

And the system partition on "usbimage" is an EFI system partition 0.276

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.150

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.085

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.110

And the system partition on "usbimage" has the expected flags 0.080

Hooks

After features/support/hooks.rb:291 0.651

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:0.553	Passed

Feature Report