Cucumber Reports (no 4560) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4560	09 Dec 2023, 12:15

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:5.355	Passed

Tags: @product @not_release_blocker

37.514

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.516

And I temporarily create a 4 GiB disk named "gptfat" 0.054

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.165

And I plug USB drive "gptfat" 2.420

When I start Tails Installer 22.313

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 0.976

After features/support/hooks.rb:75 0.001

Tags: @product

35.304

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.248

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 23.963

But a suitable USB device is not found 0.025

When I plug USB drive "temp" 2.724

Then the "temp" USB drive is selected 0.085

When I unplug USB drive "temp" 0.196

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.693

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.042

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.227

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.122

And I plug USB drive "install" 2.412

And I install Tails to USB drive "install" by cloning 3:31.018

Then the running Tails is installed on USB drive "install" 11.125

But there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.198

After features/support/hooks.rb:75 0.144

Tags: @product

3:54.660

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.526

And I temporarily create a 7200 MiB disk named "install" 0.053

And I plug USB drive "install" 2.430

And I install Tails to USB drive "install" by cloning 3:31.858

Then the running Tails is installed on USB drive "install" 11.715

But there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.082

After features/support/hooks.rb:75 0.126

Tags: @product

4:31.296

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.303

And I create a file in the Persistent directory 0.073

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 4.131

And I plug USB drive "install" 2.421

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.102

Then the running Tails is installed on USB drive "install" 15.347

And there is a persistence partition on USB drive "install" 0.077

And the USB drive "install" contains the same files as my persistent storage 3.792

Hooks

After features/support/hooks.rb:291 2.277

After features/support/hooks.rb:75 0.151

Tags: @product

4:3.954

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.774

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.448

And I install Tails to USB drive "install" by cloning 3:34.381

Then the running Tails is installed on USB drive "install" 16.233

And there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.805

After features/support/hooks.rb:75 0.110

Tags: @product

4:6.482

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.988

And I have started Tails from DVD without network and logged in 8.481

And I clone USB drive "__internal" to a temporary USB drive "install" 1.199

And I plug USB drive "install" 2.444

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:33.142

Then the running Tails is installed on USB drive "install" 11.147

And there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.292

After features/support/hooks.rb:75 0.141

Tags: @product @uefi

1:32.920

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.173

And I power off the computer 0.357

And the computer is set to boot in UEFI mode 0.039

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.145

Then Tails is running from USB drive "__internal" 0.346

And the boot device has safe access rights 3.798

And Tails has started in UEFI mode 0.058

Hooks

After features/support/hooks.rb:291 0.670

After features/support/hooks.rb:75 0.006

Tags: @product

1:38.164

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.152

And I plug and mount a USB drive containing a Tails USB image 31.122

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.395

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 55.451

Hooks

After features/support/hooks.rb:291 1.618

After features/support/hooks.rb:75 0.104

Tags: @product

1:8.015

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.192

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:6.366

Then Tails is running from USB drive "usbimage" 0.500

And the label of the system partition on "usbimage" is "Tails" 0.280

And the system partition on "usbimage" is an EFI system partition 0.178

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.186

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.143

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.089

And the system partition on "usbimage" has the expected flags 0.078

Hooks

After features/support/hooks.rb:291 0.718

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:5.355	Passed

Feature Report