Cucumber Reports (no 4561) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4561	10 Dec 2023, 12:12

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:59.488	Passed

Tags: @product @not_release_blocker

41.100

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.734

And I temporarily create a 4 GiB disk named "gptfat" 0.062

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.301

And I plug USB drive "gptfat" 2.416

When I start Tails Installer 24.546

Then I am told by Tails Installer that the destination device "is too small" 0.039

Hooks

After features/support/hooks.rb:291 1.039

After features/support/hooks.rb:75 0.001

Tags: @product

33.516

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.337

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 22.103

But a suitable USB device is not found 0.027

When I plug USB drive "temp" 2.709

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.198

Then a suitable USB device is not found 0.016

Hooks

After features/support/hooks.rb:291 0.790

After features/support/hooks.rb:75 0.000

Tags: @product

3:56.564

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.283

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 4.114

And I plug USB drive "install" 2.396

And I install Tails to USB drive "install" by cloning 3:30.019

Then the running Tails is installed on USB drive "install" 11.635

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.183

After features/support/hooks.rb:75 0.125

Tags: @product

3:55.256

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.444

And I temporarily create a 7200 MiB disk named "install" 0.075

And I plug USB drive "install" 2.701

And I install Tails to USB drive "install" by cloning 3:31.692

Then the running Tails is installed on USB drive "install" 12.283

But there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.106

After features/support/hooks.rb:75 0.136

Tags: @product

4:27.919

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.185

And I create a file in the Persistent directory 0.097

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 5.183

And I plug USB drive "install" 2.475

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.934

Then the running Tails is installed on USB drive "install" 13.219

And there is a persistence partition on USB drive "install" 0.101

And the USB drive "install" contains the same files as my persistent storage 3.676

Hooks

After features/support/hooks.rb:291 1.975

After features/support/hooks.rb:75 0.141

Tags: @product

3:57.768

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.925

And I temporarily create a 7200 MiB disk named "install" 0.050

And I plug USB drive "install" 2.471

And I install Tails to USB drive "install" by cloning 3:29.147

Then the running Tails is installed on USB drive "install" 16.079

And there is no persistence partition on USB drive "install" 0.094

Hooks

After features/support/hooks.rb:291 1.928

After features/support/hooks.rb:75 0.120

Tags: @product

4:2.180

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.555

And I have started Tails from DVD without network and logged in 8.861

And I clone USB drive "__internal" to a temporary USB drive "install" 1.185

And I plug USB drive "install" 2.487

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.836

Then the running Tails is installed on USB drive "install" 11.180

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.322

After features/support/hooks.rb:75 0.137

Tags: @product @uefi

1:36.489

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.085

And I power off the computer 0.332

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:21.047

Then Tails is running from USB drive "__internal" 0.395

And the boot device has safe access rights 3.544

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:291 0.618

After features/support/hooks.rb:75 0.005

Tags: @product

1:39.577

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.929

And I plug and mount a USB drive containing a Tails USB image 33.344

And I create a 7200 MiB disk named "usbimage" 0.050

And I plug USB drive "usbimage" 2.477

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.775

Hooks

After features/support/hooks.rb:291 1.807

After features/support/hooks.rb:75 0.111

Tags: @product

1:9.115

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.168

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.604

Then Tails is running from USB drive "usbimage" 0.515

And the label of the system partition on "usbimage" is "Tails" 0.202

And the system partition on "usbimage" is an EFI system partition 0.183

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.166

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.084

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.106

And the system partition on "usbimage" has the expected flags 0.082

Hooks

After features/support/hooks.rb:291 0.668

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:59.488	Passed

Feature Report