Cucumber Reports (no 4563) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4563	11 Dec 2023, 14:59

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:34.100	Passed

Tags: @product @not_release_blocker

38.714

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.299

And I temporarily create a 4 GiB disk named "gptfat" 0.043

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.043

And I plug USB drive "gptfat" 2.415

When I start Tails Installer 22.866

Then I am told by Tails Installer that the destination device "is too small" 0.046

Hooks

After features/support/hooks.rb:291 1.110

After features/support/hooks.rb:75 0.001

Tags: @product

33.251

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.776

And I temporarily create a 7200 MiB disk named "temp" 0.073

And I start Tails Installer 22.267

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.722

Then the "temp" USB drive is selected 0.111

When I unplug USB drive "temp" 0.245

Then a suitable USB device is not found 0.030

Hooks

After features/support/hooks.rb:291 0.876

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.334

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.442

And I temporarily create a 7200 MiB disk named "install" 0.090

And I create a gpt partition with a vfat filesystem on disk "install" 5.118

And I plug USB drive "install" 2.415

And I install Tails to USB drive "install" by cloning 3:29.940

Then the running Tails is installed on USB drive "install" 11.251

But there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 1.210

After features/support/hooks.rb:75 0.126

Tags: @product

3:52.488

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.706

And I temporarily create a 7200 MiB disk named "install" 0.068

And I plug USB drive "install" 2.443

And I install Tails to USB drive "install" by cloning 3:29.845

Then the running Tails is installed on USB drive "install" 11.345

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.263

After features/support/hooks.rb:75 0.115

Tags: @product

4:16.874

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.748

And I create a file in the Persistent directory 0.078

And I temporarily create a 7200 MiB disk named "install" 0.073

And I create a gpt partition with a vfat filesystem on disk "install" 4.104

And I plug USB drive "install" 2.463

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.473

Then the running Tails is installed on USB drive "install" 14.545

And there is a persistence partition on USB drive "install" 0.096

And the USB drive "install" contains the same files as my persistent storage 3.290

Hooks

After features/support/hooks.rb:291 1.665

After features/support/hooks.rb:75 0.117

Tags: @product

3:57.217

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.201

And I temporarily create a 7200 MiB disk named "install" 0.058

And I plug USB drive "install" 2.430

And I install Tails to USB drive "install" by cloning 3:30.193

Then the running Tails is installed on USB drive "install" 14.271

And there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.608

After features/support/hooks.rb:75 0.089

Tags: @product

4:4.817

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.447

And I have started Tails from DVD without network and logged in 8.145

And I clone USB drive "__internal" to a temporary USB drive "install" 2.224

And I plug USB drive "install" 2.379

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.927

Then the running Tails is installed on USB drive "install" 12.523

And there is no persistence partition on USB drive "install" 0.171

Hooks

After features/support/hooks.rb:291 1.319

After features/support/hooks.rb:75 0.115

Tags: @product @uefi

1:30.068

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.410

And I power off the computer 0.324

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:13.068

Then Tails is running from USB drive "__internal" 0.561

And the boot device has safe access rights 3.586

And Tails has started in UEFI mode 0.090

Hooks

After features/support/hooks.rb:291 0.753

After features/support/hooks.rb:75 0.009

Tags: @product

1:32.400

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.056

And I plug and mount a USB drive containing a Tails USB image 28.640

And I create a 7200 MiB disk named "usbimage" 0.045

And I plug USB drive "usbimage" 2.399

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.258

Hooks

After features/support/hooks.rb:291 1.356

After features/support/hooks.rb:75 0.090

Tags: @product

1:10.931

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.167

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.451

Then Tails is running from USB drive "usbimage" 0.464

And the label of the system partition on "usbimage" is "Tails" 0.208

And the system partition on "usbimage" is an EFI system partition 0.220

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.160

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.089

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.090

Hooks

After features/support/hooks.rb:291 0.674

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:34.100	Passed

Feature Report