Cucumber Reports (no 4564) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4564	12 Dec 2023, 12:06

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:56.593	Passed

Tags: @product @not_release_blocker

37.662

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.688

And I temporarily create a 4 GiB disk named "gptfat" 0.061

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.978

And I plug USB drive "gptfat" 2.439

When I start Tails Installer 22.450

Then I am told by Tails Installer that the destination device "is too small" 0.043

Hooks

After features/support/hooks.rb:291 1.060

After features/support/hooks.rb:75 0.001

Tags: @product

33.988

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.240

And I temporarily create a 7200 MiB disk named "temp" 0.054

And I start Tails Installer 22.508

But a suitable USB device is not found 0.025

When I plug USB drive "temp" 2.829

Then the "temp" USB drive is selected 0.106

When I unplug USB drive "temp" 0.198

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.781

After features/support/hooks.rb:75 0.000

Tags: @product

4:19.199

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 10.417

And I temporarily create a 7200 MiB disk named "install" 0.060

And I create a gpt partition with a vfat filesystem on disk "install" 5.496

And I plug USB drive "install" 2.517

And I install Tails to USB drive "install" by cloning 3:49.447

Then the running Tails is installed on USB drive "install" 11.152

But there is no persistence partition on USB drive "install" 0.106

Hooks

After features/support/hooks.rb:291 1.259

After features/support/hooks.rb:75 0.104

Tags: @product

3:51.021

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.964

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.653

And I install Tails to USB drive "install" by cloning 3:28.682

Then the running Tails is installed on USB drive "install" 10.602

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.925

After features/support/hooks.rb:75 0.188

Tags: @product

4:21.269

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.233

And I create a file in the Persistent directory 0.372

And I temporarily create a 7200 MiB disk named "install" 0.069

And I create a gpt partition with a vfat filesystem on disk "install" 5.189

And I plug USB drive "install" 2.547

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:43.042

Then the running Tails is installed on USB drive "install" 14.842

And there is a persistence partition on USB drive "install" 0.103

And the USB drive "install" contains the same files as my persistent storage 3.869

Hooks

After features/support/hooks.rb:291 2.185

After features/support/hooks.rb:75 0.146

Tags: @product

4:2.043

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.665

And I temporarily create a 7200 MiB disk named "install" 0.078

And I plug USB drive "install" 2.415

And I install Tails to USB drive "install" by cloning 3:31.360

Then the running Tails is installed on USB drive "install" 16.448

And there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 1.956

After features/support/hooks.rb:75 0.103

Tags: @product

4:1.750

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.223

And I have started Tails from DVD without network and logged in 8.248

And I clone USB drive "__internal" to a temporary USB drive "install" 1.136

And I plug USB drive "install" 2.506

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.932

Then the running Tails is installed on USB drive "install" 10.615

And there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:291 1.186

After features/support/hooks.rb:75 0.121

Tags: @product @uefi

1:28.509

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.793

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:12.216

Then Tails is running from USB drive "__internal" 0.352

And the boot device has safe access rights 3.723

And Tails has started in UEFI mode 0.055

Hooks

After features/support/hooks.rb:291 0.629

After features/support/hooks.rb:75 0.006

Tags: @product

1:31.546

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.133

And I plug and mount a USB drive containing a Tails USB image 27.062

And I create a 7200 MiB disk named "usbimage" 0.037

And I plug USB drive "usbimage" 2.514

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.798

Hooks

After features/support/hooks.rb:291 1.835

After features/support/hooks.rb:75 0.080

Tags: @product

1:9.601

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.009

Steps

Given a computer 0.250

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.703

Then Tails is running from USB drive "usbimage" 0.432

And the label of the system partition on "usbimage" is "Tails" 0.349

And the system partition on "usbimage" is an EFI system partition 0.252

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.188

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.147

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.166

And the system partition on "usbimage" has the expected flags 0.110

Hooks

After features/support/hooks.rb:291 0.670

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:56.593	Passed

Feature Report