Cucumber Reports (no 4565) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4565	12 Dec 2023, 17:35

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:20.863	Passed

Tags: @product @not_release_blocker

37.606

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.699

And I temporarily create a 4 GiB disk named "gptfat" 0.050

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.079

And I plug USB drive "gptfat" 2.408

When I start Tails Installer 21.314

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 1.012

After features/support/hooks.rb:75 0.000

Tags: @product

33.006

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.125

And I temporarily create a 7200 MiB disk named "temp" 0.068

And I start Tails Installer 21.747

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.752

Then the "temp" USB drive is selected 0.089

When I unplug USB drive "temp" 0.185

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.773

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.937

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.832

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 4.145

And I plug USB drive "install" 2.409

And I install Tails to USB drive "install" by cloning 3:28.924

Then the running Tails is installed on USB drive "install" 10.497

But there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.040

After features/support/hooks.rb:75 0.108

Tags: @product

3:50.229

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.020

And I temporarily create a 7200 MiB disk named "install" 0.062

And I plug USB drive "install" 2.471

And I install Tails to USB drive "install" by cloning 3:28.968

Then the running Tails is installed on USB drive "install" 10.628

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.160

After features/support/hooks.rb:75 0.106

Tags: @product

4:58.227

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 42.407

And I create a file in the Persistent directory 0.169

And I temporarily create a 7200 MiB disk named "install" 0.057

And I create a gpt partition with a vfat filesystem on disk "install" 4.139

And I plug USB drive "install" 2.515

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.462

Then the running Tails is installed on USB drive "install" 13.698

And there is a persistence partition on USB drive "install" 0.079

And the USB drive "install" contains the same files as my persistent storage 3.696

Hooks

After features/support/hooks.rb:291 1.851

After features/support/hooks.rb:75 0.126

Tags: @product

4:0.305

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.327

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.416

And I install Tails to USB drive "install" by cloning 3:31.333

Then the running Tails is installed on USB drive "install" 16.080

And there is no persistence partition on USB drive "install" 0.102

Hooks

After features/support/hooks.rb:291 1.819

After features/support/hooks.rb:75 0.089

Tags: @product

4:5.068

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.240

And I have started Tails from DVD without network and logged in 8.456

And I clone USB drive "__internal" to a temporary USB drive "install" 1.000

And I plug USB drive "install" 2.403

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:32.223

Then the running Tails is installed on USB drive "install" 11.689

And there is no persistence partition on USB drive "install" 0.054

Hooks

After features/support/hooks.rb:291 1.171

After features/support/hooks.rb:75 0.111

Tags: @product @uefi

1:41.714

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.766

And I power off the computer 0.326

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:25.389

Then Tails is running from USB drive "__internal" 0.418

And the boot device has safe access rights 3.732

And Tails has started in UEFI mode 0.049

Hooks

After features/support/hooks.rb:291 0.631

After features/support/hooks.rb:75 0.006

Tags: @product

1:29.810

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.898

And I plug and mount a USB drive containing a Tails USB image 27.263

And I create a 7200 MiB disk named "usbimage" 0.046

And I plug USB drive "usbimage" 2.411

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.190

Hooks

After features/support/hooks.rb:291 1.739

After features/support/hooks.rb:75 0.079

Tags: @product

1:10.956

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.160

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.477

Then Tails is running from USB drive "usbimage" 0.458

And the label of the system partition on "usbimage" is "Tails" 0.277

And the system partition on "usbimage" is an EFI system partition 0.191

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.129

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.097

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.079

And the system partition on "usbimage" has the expected flags 0.083

Hooks

After features/support/hooks.rb:291 0.670

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:20.863	Passed

Feature Report