Project Number Date
test_Tails_ISO_stable 4575 18 Dec 2023, 18:05

Failures Overview

The following summary displays scenarios that failed.

Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker
4:29.571
Scenario Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online
Before features/support/hooks.rb:245 0.005
Before features/support/hooks.rb:442 0.007
Steps
Given a computer 0.188
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 4:29.383
cannot 
cannot find GnomeApplicationsMenu.png on the screen (FindFailed)
./features/support/helpers/screen.rb:166:in `rescue in wait'
./features/support/helpers/screen.rb:159:in `wait'
./features/step_definitions/common_steps.rb:499:in `/^the Tails desktop is ready$/'
./features/step_definitions/common_steps.rb:454:in `/^I log in to a new session(?: in ([^ ]*) \(([^ ]*)\))?( without activating the Persistent Storage)?( after having activated the Persistent Storage| expecting no warning about the Persistent Storage not being activated)?$/'
./features/step_definitions/common_steps.rb:240:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:75:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
And I configure APT to prefer an old version of cowsay 0.000
When I install an old version "3.03+dfsg2-1" of the cowsay package using apt 0.000
And I accept adding "cowsay" to Additional Software 0.000
And Additional Software is correctly configured for package "cowsay" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
# We remove the newest package after it has been downloaded and before
# it is installed, so that the upgrade process fails
And I prepare the Additional Software upgrade process to fail 0.000
And the network is plugged 0.000
And Tor is ready 0.000
# Note: the next step races against the appearance of the "The
# upgrade of your additional software failed" notification.
# It should win most of the time, which is good, but there's no
# guarantee it does. If it loses, then it'll remove the notification
# we'll be trying to interact with below ("I can open…")
And all notifications have disappeared 0.000
And available upgrades have been checked 0.000
And I see the "The upgrade of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software configuration window from the notification 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
And the network is plugged 0.000
And Tor is ready 0.000
Then the Additional Software upgrade service has started 0.000
And the installed version of package "cowsay" is newer than "3.03+dfsg2-1" 0.000
After features/support/hooks.rb:450 0.048
After features/support/hooks.rb:291 5.464 
SCENARIO FAILED: 'Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online' (at time 01:22:21)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:22:21_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.journal
After features/support/hooks.rb:75 0.009
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker_inherited
6:53.856
Scenario I am notified when Additional Software fails to install a package
Before features/support/hooks.rb:245 0.006
Before features/support/hooks.rb:442 0.006
Steps
Given a computer 0.215
And I start Tails from USB drive "__internal" with network unplugged 56.001
And I enable persistence 32.337
And I remove the "cowsay" deb files from the APT cache 0.672
# Prevent the "Warning: virtual machine detected!" notification from racing
# with the one we'll be interacting with below.
And I disable the tails-virt-notify-user.service user unit 0.095
And I log in to a new session 23.565
Then I see the "The installation of your additional software failed" notification after at most 300 seconds 5:0.968
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:548:in `/^I see the "(.+)" notification(?: after at most (\d+) seconds)?$/'
features/additional_software_packages.feature:128:in `Then I see the "The installation of your additional software failed" notification after at most 300 seconds'
And I can open the Additional Software log file from the notification 0.000
And the package "cowsay" is not installed 0.000
After features/support/hooks.rb:450 0.036
After features/support/hooks.rb:291 7.664 
SCENARIO FAILED: 'I am notified when Additional Software fails to install a package' (at time 01:29:20)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:29:20_I_am_notified_when_Additional_Software_fails_to_install_a_package.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/01:29:20_I_am_notified_when_Additional_Software_fails_to_install_a_package.mkv
After features/support/hooks.rb:75 0.013
Feature: Tails persistence
Tags: @product
5:11.716
Scenario Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it
Before features/support/hooks.rb:245 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.994
Then Tails is running from USB drive "__internal" 0.486
And all tps features are active 2.780
And all persistent directories have safe access rights 3.139
When I disable the first tps feature 16.690
Then all tps features but the first one are active 2.893
And I shutdown Tails and wait for the computer to power off 5.066
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 4:30.664
cannot 
cannot find GnomeApplicationsMenu.png on the screen (FindFailed)
./features/support/helpers/screen.rb:166:in `rescue in wait'
./features/support/helpers/screen.rb:159:in `wait'
./features/step_definitions/common_steps.rb:499:in `/^the Tails desktop is ready$/'
./features/step_definitions/common_steps.rb:454:in `/^I log in to a new session(?: in ([^ ]*) \(([^ ]*)\))?( without activating the Persistent Storage)?( after having activated the Persistent Storage| expecting no warning about the Persistent Storage not being activated)?$/'
./features/step_definitions/common_steps.rb:240:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/persistence.feature:49:in `And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled'
Then all tps features but the first one are active 0.000
After features/support/hooks.rb:291 4.705 
SCENARIO FAILED: 'Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it' (at time 03:01:49)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:01:49_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:01:49_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:01:49_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:01:49_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.journal
After features/support/hooks.rb:75 0.017
Feature: Logging in via SSH
Tags: @product @check_tor_leaks
21.686
Scenario Connecting to an SSH server on the Internet works and uses the default SocksPort
Steps
Given I monitor the network connections of SSH 0.124
And I have the SSH key pair for an SSH server 0.233
When I connect to an SSH server on the Internet 21.329
cannot 
cannot find GnomeApplicationsMenu.png on the screen (FindFailed)
./features/support/helpers/screen.rb:166:in `rescue in wait'
./features/support/helpers/screen.rb:159:in `wait'
./features/step_definitions/common_steps.rb:926:in `/^I start "([^"]+)" via GNOME Activities Overview$/'
./features/step_definitions/common_steps.rb:841:in `/^I run "([^"]+)" in GNOME Terminal$/'
./features/step_definitions/ssh.rb:105:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:193:in `block in retry_tor'
./features/support/helpers/misc_helpers.rb:222:in `rescue in block in retry_action'
./features/support/helpers/misc_helpers.rb:209:in `block in retry_action'
./features/support/helpers/misc_helpers.rb:208:in `loop'
./features/support/helpers/misc_helpers.rb:208:in `retry_action'
./features/support/helpers/misc_helpers.rb:196:in `retry_tor'
./features/step_definitions/ssh.rb:108:in `/^I connect to an SSH server on the (Internet|LAN)$/'
features/ssh.feature:14:in `When I connect to an SSH server on the Internet'
Then I have sucessfully logged into the SSH server 0.000
And I see that SSH is properly stream isolated 0.000
After features/support/hooks.rb:450 0.045
After features/support/hooks.rb:291 4.133 
SCENARIO FAILED: 'Connecting to an SSH server on the Internet works and uses the default SocksPort' (at time 03:37:56)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:37:56_Connecting_to_an_SSH_server_on_the_Internet_works_and_uses_the_default_SocksPort.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:37:56_Connecting_to_an_SSH_server_on_the_Internet_works_and_uses_the_default_SocksPort.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:37:56_Connecting_to_an_SSH_server_on_the_Internet_works_and_uses_the_default_SocksPort.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4575/artifact/build-artifacts/03:37:56_Connecting_to_an_SSH_server_on_the_Internet_works_and_uses_the_default_SocksPort.journal
After features/support/hooks.rb:75 0.000