Cucumber Reports (no 4576) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4576	18 Dec 2023, 22:11

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:33.956	Passed

Tags: @product @not_release_blocker

35.356

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.815

And I temporarily create a 4 GiB disk named "gptfat" 0.062

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.941

And I plug USB drive "gptfat" 2.386

When I start Tails Installer 21.110

Then I am told by Tails Installer that the destination device "is too small" 0.039

Hooks

After features/support/hooks.rb:291 0.921

After features/support/hooks.rb:75 0.001

Tags: @product

31.923

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.485

And I temporarily create a 7200 MiB disk named "temp" 0.048

And I start Tails Installer 21.411

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.685

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.169

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.711

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.827

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.035

And I temporarily create a 7200 MiB disk named "install" 0.038

And I create a gpt partition with a vfat filesystem on disk "install" 4.075

And I plug USB drive "install" 2.384

And I install Tails to USB drive "install" by cloning 3:28.637

Then the running Tails is installed on USB drive "install" 9.590

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 0.913

After features/support/hooks.rb:75 0.101

Tags: @product

3:49.737

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.930

And I temporarily create a 7200 MiB disk named "install" 0.065

And I plug USB drive "install" 2.398

And I install Tails to USB drive "install" by cloning 3:28.466

Then the running Tails is installed on USB drive "install" 10.759

But there is no persistence partition on USB drive "install" 0.117

Hooks

After features/support/hooks.rb:291 1.207

After features/support/hooks.rb:75 0.129

Tags: @product

4:39.046

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.166

And I create a file in the Persistent directory 0.233

And I temporarily create a 7200 MiB disk named "install" 0.233

And I create a gpt partition with a vfat filesystem on disk "install" 6.893

And I plug USB drive "install" 2.492

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:59.488

Then the running Tails is installed on USB drive "install" 13.834

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.638

Hooks

After features/support/hooks.rb:291 2.472

After features/support/hooks.rb:75 0.112

Tags: @product

3:57.702

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.553

And I temporarily create a 7200 MiB disk named "install" 0.073

And I plug USB drive "install" 2.449

And I install Tails to USB drive "install" by cloning 3:30.404

Then the running Tails is installed on USB drive "install" 13.128

And there is no persistence partition on USB drive "install" 0.093

Hooks

After features/support/hooks.rb:291 1.988

After features/support/hooks.rb:75 0.095

Tags: @product

4:0.930

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.005

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.958

And I have started Tails from DVD without network and logged in 8.362

And I clone USB drive "__internal" to a temporary USB drive "install" 1.007

And I plug USB drive "install" 2.420

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.554

Then the running Tails is installed on USB drive "install" 10.560

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.009

After features/support/hooks.rb:75 0.109

Tags: @product @uefi

1:29.360

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.570

And I power off the computer 0.336

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:13.580

Then Tails is running from USB drive "__internal" 0.351

And the boot device has safe access rights 4.434

And Tails has started in UEFI mode 0.060

Hooks

After features/support/hooks.rb:291 0.609

After features/support/hooks.rb:75 0.006

Tags: @product

1:28.050

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.957

And I plug and mount a USB drive containing a Tails USB image 27.113

And I create a 7200 MiB disk named "usbimage" 0.054

And I plug USB drive "usbimage" 2.404

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 50.521

Hooks

After features/support/hooks.rb:291 1.388

After features/support/hooks.rb:75 0.079

Tags: @product

1:9.021

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.258

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.457

Then Tails is running from USB drive "usbimage" 0.437

And the label of the system partition on "usbimage" is "Tails" 0.204

And the system partition on "usbimage" is an EFI system partition 0.213

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.148

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.113

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.089

And the system partition on "usbimage" has the expected flags 0.100

Hooks

After features/support/hooks.rb:291 0.891

After features/support/hooks.rb:75 0.013

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:33.956	Passed

Feature Report