Cucumber Reports (no 4579) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4579	20 Dec 2023, 13:33

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:55.560	Passed

Tags: @product @not_release_blocker

40.427

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.348

And I temporarily create a 4 GiB disk named "gptfat" 0.063

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.056

And I plug USB drive "gptfat" 2.427

When I start Tails Installer 24.485

Then I am told by Tails Installer that the destination device "is too small" 0.046

Hooks

After features/support/hooks.rb:291 0.925

After features/support/hooks.rb:75 0.001

Tags: @product

33.612

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.921

And I temporarily create a 7200 MiB disk named "temp" 0.048

And I start Tails Installer 22.012

But a suitable USB device is not found 0.018

When I plug USB drive "temp" 3.258

Then the "temp" USB drive is selected 0.130

When I unplug USB drive "temp" 0.193

Then a suitable USB device is not found 0.028

Hooks

After features/support/hooks.rb:291 0.755

After features/support/hooks.rb:75 0.001

Tags: @product

3:57.239

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.457

And I temporarily create a 7200 MiB disk named "install" 0.050

And I create a gpt partition with a vfat filesystem on disk "install" 5.107

And I plug USB drive "install" 2.426

And I install Tails to USB drive "install" by cloning 3:29.846

Then the running Tails is installed on USB drive "install" 11.261

But there is no persistence partition on USB drive "install" 0.089

Hooks

After features/support/hooks.rb:291 1.240

After features/support/hooks.rb:75 0.106

Tags: @product

3:51.347

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.987

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.424

And I install Tails to USB drive "install" by cloning 3:28.802

Then the running Tails is installed on USB drive "install" 11.021

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.114

After features/support/hooks.rb:75 0.104

Tags: @product

4:26.291

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.276

And I create a file in the Persistent directory 0.115

And I temporarily create a 7200 MiB disk named "install" 0.040

And I create a gpt partition with a vfat filesystem on disk "install" 4.053

And I plug USB drive "install" 2.447

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.207

Then the running Tails is installed on USB drive "install" 13.464

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 3.621

Hooks

After features/support/hooks.rb:291 1.963

After features/support/hooks.rb:75 0.117

Tags: @product

3:59.711

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.273

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.488

And I install Tails to USB drive "install" by cloning 3:29.346

Then the running Tails is installed on USB drive "install" 15.461

And there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:291 1.489

After features/support/hooks.rb:75 0.136

Tags: @product

4:3.391

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.793

And I have started Tails from DVD without network and logged in 9.076

And I clone USB drive "__internal" to a temporary USB drive "install" 1.112

And I plug USB drive "install" 2.408

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.016

Then the running Tails is installed on USB drive "install" 11.894

And there is no persistence partition on USB drive "install" 0.089

Hooks

After features/support/hooks.rb:291 1.216

After features/support/hooks.rb:75 0.138

Tags: @product @uefi

1:32.141

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.867

And I power off the computer 0.334

And the computer is set to boot in UEFI mode 0.029

When I start Tails from USB drive "__internal" with network unplugged and I login 1:15.053

Then Tails is running from USB drive "__internal" 0.397

And the boot device has safe access rights 4.374

And Tails has started in UEFI mode 0.083

Hooks

After features/support/hooks.rb:291 0.886

After features/support/hooks.rb:75 0.008

Tags: @product

1:37.761

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.106

And I plug and mount a USB drive containing a Tails USB image 32.132

And I create a 7200 MiB disk named "usbimage" 0.066

And I plug USB drive "usbimage" 2.489

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 54.966

Hooks

After features/support/hooks.rb:291 1.566

After features/support/hooks.rb:75 0.094

Tags: @product

1:13.635

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.173

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:12.182

Then Tails is running from USB drive "usbimage" 0.420

And the label of the system partition on "usbimage" is "Tails" 0.193

And the system partition on "usbimage" is an EFI system partition 0.183

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.201

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.090

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.088

And the system partition on "usbimage" has the expected flags 0.102

Hooks

After features/support/hooks.rb:291 0.663

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:55.560	Passed

Feature Report