Cucumber Reports (no 4587) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4587	23 Dec 2023, 12:02

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:21.953	Passed

Tags: @product @not_release_blocker

35.735

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.744

And I temporarily create a 4 GiB disk named "gptfat" 0.042

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.994

And I plug USB drive "gptfat" 2.433

When I start Tails Installer 21.477

Then I am told by Tails Installer that the destination device "is too small" 0.042

Hooks

After features/support/hooks.rb:291 1.176

After features/support/hooks.rb:75 0.001

Tags: @product

32.910

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.787

And I temporarily create a 7200 MiB disk named "temp" 0.052

And I start Tails Installer 22.103

But a suitable USB device is not found 0.018

When I plug USB drive "temp" 2.681

Then the "temp" USB drive is selected 0.075

When I unplug USB drive "temp" 0.174

Then a suitable USB device is not found 0.016

Hooks

After features/support/hooks.rb:291 0.744

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.290

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.558

And I temporarily create a 7200 MiB disk named "install" 0.056

And I create a gpt partition with a vfat filesystem on disk "install" 4.129

And I plug USB drive "install" 2.406

And I install Tails to USB drive "install" by cloning 3:28.916

Then the running Tails is installed on USB drive "install" 10.157

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 0.998

After features/support/hooks.rb:75 0.103

Tags: @product

3:50.474

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.907

And I temporarily create a 7200 MiB disk named "install" 0.067

And I plug USB drive "install" 2.455

And I install Tails to USB drive "install" by cloning 3:29.956

Then the running Tails is installed on USB drive "install" 10.007

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.303

After features/support/hooks.rb:75 0.101

Tags: @product

4:13.859

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.209

And I create a file in the Persistent directory 0.085

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 4.033

And I plug USB drive "install" 2.417

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:38.995

Then the running Tails is installed on USB drive "install" 13.450

And there is a persistence partition on USB drive "install" 0.064

And the USB drive "install" contains the same files as my persistent storage 3.554

Hooks

After features/support/hooks.rb:291 2.168

After features/support/hooks.rb:75 0.115

Tags: @product

4:1.679

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.221

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.437

And I install Tails to USB drive "install" by cloning 3:28.825

Then the running Tails is installed on USB drive "install" 19.074

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.686

After features/support/hooks.rb:75 0.093

Tags: @product

4:2.700

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.302

And I have started Tails from DVD without network and logged in 8.302

And I clone USB drive "__internal" to a temporary USB drive "install" 1.100

And I plug USB drive "install" 2.403

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.131

Then the running Tails is installed on USB drive "install" 10.381

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 1.039

After features/support/hooks.rb:75 0.113

Tags: @product @uefi

1:35.910

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.894

And I power off the computer 0.333

And the computer is set to boot in UEFI mode 0.030

When I start Tails from USB drive "__internal" with network unplugged and I login 1:20.004

Then Tails is running from USB drive "__internal" 0.314

And the boot device has safe access rights 3.291

And Tails has started in UEFI mode 0.043

Hooks

After features/support/hooks.rb:291 0.589

After features/support/hooks.rb:75 0.006

Tags: @product

1:29.944

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.889

And I plug and mount a USB drive containing a Tails USB image 26.327

And I create a 7200 MiB disk named "usbimage" 0.040

And I plug USB drive "usbimage" 2.436

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.250

Hooks

After features/support/hooks.rb:291 1.239

After features/support/hooks.rb:75 0.082

Tags: @product

1:5.448

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.166

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:3.977

Then Tails is running from USB drive "usbimage" 0.434

And the label of the system partition on "usbimage" is "Tails" 0.254

And the system partition on "usbimage" is an EFI system partition 0.192

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.138

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.095

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.096

And the system partition on "usbimage" has the expected flags 0.091

Hooks

After features/support/hooks.rb:291 0.665

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:21.953	Passed

Feature Report