Cucumber Reports (no 4588) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4588	24 Dec 2023, 12:04

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:31.338	Passed

Tags: @product @not_release_blocker

36.446

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.170

And I temporarily create a 4 GiB disk named "gptfat" 0.047

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.021

And I plug USB drive "gptfat" 2.398

When I start Tails Installer 21.768

Then I am told by Tails Installer that the destination device "is too small" 0.039

Hooks

After features/support/hooks.rb:291 0.969

After features/support/hooks.rb:75 0.001

Tags: @product

32.466

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.722

And I temporarily create a 7200 MiB disk named "temp" 0.085

And I start Tails Installer 21.614

But a suitable USB device is not found 0.017

When I plug USB drive "temp" 2.705

Then the "temp" USB drive is selected 0.089

When I unplug USB drive "temp" 0.211

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.696

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.161

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.040

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 4.134

And I plug USB drive "install" 2.398

And I install Tails to USB drive "install" by cloning 3:28.160

Then the running Tails is installed on USB drive "install" 9.312

But there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.032

After features/support/hooks.rb:75 0.100

Tags: @product

3:49.621

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.875

And I temporarily create a 7200 MiB disk named "install" 0.073

And I plug USB drive "install" 2.399

And I install Tails to USB drive "install" by cloning 3:28.760

Then the running Tails is installed on USB drive "install" 10.440

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.083

After features/support/hooks.rb:75 0.102

Tags: @product

4:26.262

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.488

And I create a file in the Persistent directory 0.098

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 4.051

And I plug USB drive "install" 2.384

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.789

Then the running Tails is installed on USB drive "install" 13.728

And there is a persistence partition on USB drive "install" 0.081

And the USB drive "install" contains the same files as my persistent storage 3.592

Hooks

After features/support/hooks.rb:291 2.248

After features/support/hooks.rb:75 0.122

Tags: @product

3:58.608

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.155

And I temporarily create a 7200 MiB disk named "install" 0.046

And I plug USB drive "install" 2.455

And I install Tails to USB drive "install" by cloning 3:28.107

Then the running Tails is installed on USB drive "install" 16.762

And there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.908

After features/support/hooks.rb:75 0.098

Tags: @product

4:7.086

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.373

And I have started Tails from DVD without network and logged in 8.436

And I clone USB drive "__internal" to a temporary USB drive "install" 0.981

And I plug USB drive "install" 2.406

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.311

Then the running Tails is installed on USB drive "install" 12.500

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.003

After features/support/hooks.rb:75 0.085

Tags: @product @uefi

1:31.586

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.391

And I power off the computer 0.322

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:15.998

Then Tails is running from USB drive "__internal" 0.368

And the boot device has safe access rights 3.407

And Tails has started in UEFI mode 0.072

Hooks

After features/support/hooks.rb:291 0.779

After features/support/hooks.rb:75 0.005

Tags: @product

1:28.605

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.257

And I plug and mount a USB drive containing a Tails USB image 25.907

And I create a 7200 MiB disk named "usbimage" 0.042

And I plug USB drive "usbimage" 2.409

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 51.988

Hooks

After features/support/hooks.rb:291 1.330

After features/support/hooks.rb:75 0.085

Tags: @product

1:8.492

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.159

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:6.912

Then Tails is running from USB drive "usbimage" 0.384

And the label of the system partition on "usbimage" is "Tails" 0.196

And the system partition on "usbimage" is an EFI system partition 0.297

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.235

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.118

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.115

And the system partition on "usbimage" has the expected flags 0.072

Hooks

After features/support/hooks.rb:291 0.721

After features/support/hooks.rb:75 0.020

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:31.338	Passed

Feature Report