Cucumber Reports (no 4600) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4600	03 Jan 2024, 12:18

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:50.435	Passed

Tags: @product @not_release_blocker

37.211

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.157

And I temporarily create a 4 GiB disk named "gptfat" 0.042

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.033

And I plug USB drive "gptfat" 2.450

When I start Tails Installer 22.481

Then I am told by Tails Installer that the destination device "is too small" 0.046

Hooks

After features/support/hooks.rb:291 1.069

After features/support/hooks.rb:75 0.001

Tags: @product

33.528

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.391

And I temporarily create a 7200 MiB disk named "temp" 0.038

And I start Tails Installer 21.860

But a suitable USB device is not found 0.068

When I plug USB drive "temp" 2.835

Then the "temp" USB drive is selected 0.097

When I unplug USB drive "temp" 0.210

Then a suitable USB device is not found 0.025

Hooks

After features/support/hooks.rb:291 0.790

After features/support/hooks.rb:75 0.000

Tags: @product

3:56.984

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.722

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 4.128

And I plug USB drive "install" 2.454

And I install Tails to USB drive "install" by cloning 3:29.868

Then the running Tails is installed on USB drive "install" 11.624

But there is no persistence partition on USB drive "install" 0.136

Hooks

After features/support/hooks.rb:291 1.083

After features/support/hooks.rb:75 0.108

Tags: @product

3:50.841

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.399

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.534

And I install Tails to USB drive "install" by cloning 3:29.017

Then the running Tails is installed on USB drive "install" 10.756

But there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:291 1.052

After features/support/hooks.rb:75 0.112

Tags: @product

4:29.548

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.887

And I create a file in the Persistent directory 0.081

And I temporarily create a 7200 MiB disk named "install" 0.055

And I create a gpt partition with a vfat filesystem on disk "install" 4.069

And I plug USB drive "install" 2.498

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.526

Then the running Tails is installed on USB drive "install" 13.452

And there is a persistence partition on USB drive "install" 0.120

And the USB drive "install" contains the same files as my persistent storage 3.857

Hooks

After features/support/hooks.rb:291 2.214

After features/support/hooks.rb:75 0.119

Tags: @product

3:59.086

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.771

And I temporarily create a 7200 MiB disk named "install" 0.126

And I plug USB drive "install" 2.413

And I install Tails to USB drive "install" by cloning 3:30.558

Then the running Tails is installed on USB drive "install" 14.129

And there is no persistence partition on USB drive "install" 0.085

Hooks

After features/support/hooks.rb:291 1.718

After features/support/hooks.rb:75 0.100

Tags: @product

4:2.620

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.566

And I have started Tails from DVD without network and logged in 8.861

And I clone USB drive "__internal" to a temporary USB drive "install" 1.240

And I plug USB drive "install" 2.474

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.926

Then the running Tails is installed on USB drive "install" 10.465

And there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:291 1.317

After features/support/hooks.rb:75 0.116

Tags: @product @uefi

1:35.964

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.824

And I power off the computer 0.337

And the computer is set to boot in UEFI mode 0.054

When I start Tails from USB drive "__internal" with network unplugged and I login 1:20.785

Then Tails is running from USB drive "__internal" 0.396

And the boot device has safe access rights 3.499

And Tails has started in UEFI mode 0.066

Hooks

After features/support/hooks.rb:291 0.801

After features/support/hooks.rb:75 0.006

Tags: @product

1:34.419

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.411

And I plug and mount a USB drive containing a Tails USB image 29.550

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.418

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.997

Hooks

After features/support/hooks.rb:291 1.851

After features/support/hooks.rb:75 0.083

Tags: @product

1:10.231

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.184

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.784

Then Tails is running from USB drive "usbimage" 0.453

And the label of the system partition on "usbimage" is "Tails" 0.190

And the system partition on "usbimage" is an EFI system partition 0.139

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.203

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.114

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.075

And the system partition on "usbimage" has the expected flags 0.085

Hooks

After features/support/hooks.rb:291 0.630

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:50.435	Passed

Feature Report