Cucumber Reports (no 4603) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4603	06 Jan 2024, 12:33

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:50.848	Passed

Tags: @product @not_release_blocker

38.255

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.616

And I temporarily create a 4 GiB disk named "gptfat" 0.045

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.087

And I plug USB drive "gptfat" 2.467

When I start Tails Installer 21.994

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 1.034

After features/support/hooks.rb:75 0.001

Tags: @product

34.214

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.595

And I temporarily create a 7200 MiB disk named "temp" 0.051

And I start Tails Installer 22.468

But a suitable USB device is not found 0.029

When I plug USB drive "temp" 2.750

Then the "temp" USB drive is selected 0.108

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 0.745

After features/support/hooks.rb:75 0.000

Tags: @product

3:56.381

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.929

And I temporarily create a 7200 MiB disk named "install" 0.042

And I create a gpt partition with a vfat filesystem on disk "install" 5.201

And I plug USB drive "install" 2.403

And I install Tails to USB drive "install" by cloning 3:29.728

Then the running Tails is installed on USB drive "install" 10.994

But there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.036

After features/support/hooks.rb:75 0.105

Tags: @product

3:51.505

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.664

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.453

And I install Tails to USB drive "install" by cloning 3:29.069

Then the running Tails is installed on USB drive "install" 10.207

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 0.997

After features/support/hooks.rb:75 0.104

Tags: @product

4:33.396

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.335

And I create a file in the Persistent directory 0.084

And I temporarily create a 7200 MiB disk named "install" 0.055

And I create a gpt partition with a vfat filesystem on disk "install" 4.065

And I plug USB drive "install" 2.450

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:55.724

Then the running Tails is installed on USB drive "install" 13.338

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 4.276

Hooks

After features/support/hooks.rb:291 1.711

After features/support/hooks.rb:75 0.131

Tags: @product

3:59.163

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.042

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.455

And I install Tails to USB drive "install" by cloning 3:31.526

Then the running Tails is installed on USB drive "install" 14.006

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 1.546

After features/support/hooks.rb:75 0.098

Tags: @product

4:9.679

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.155

And I have started Tails from DVD without network and logged in 12.233

And I clone USB drive "__internal" to a temporary USB drive "install" 1.074

And I plug USB drive "install" 2.457

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:31.964

Then the running Tails is installed on USB drive "install" 11.721

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.055

After features/support/hooks.rb:75 0.118

Tags: @product @uefi

1:30.893

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.970

And I power off the computer 0.356

And the computer is set to boot in UEFI mode 0.040

When I start Tails from USB drive "__internal" with network unplugged and I login 1:15.416

Then Tails is running from USB drive "__internal" 0.464

And the boot device has safe access rights 3.571

And Tails has started in UEFI mode 0.073

Hooks

After features/support/hooks.rb:291 0.617

After features/support/hooks.rb:75 0.005

Tags: @product

2:24.264

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.201

And I plug and mount a USB drive containing a Tails USB image 30.809

And I create a 7200 MiB disk named "usbimage" 0.051

And I plug USB drive "usbimage" 2.415

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:42.785

Hooks

After features/support/hooks.rb:291 2.403

After features/support/hooks.rb:75 0.108

Tags: @product

1:13.095

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.164

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:11.398

Then Tails is running from USB drive "usbimage" 0.534

And the label of the system partition on "usbimage" is "Tails" 0.217

And the system partition on "usbimage" is an EFI system partition 0.211

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.253

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.098

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.103

And the system partition on "usbimage" has the expected flags 0.111

Hooks

After features/support/hooks.rb:291 0.632

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:50.848	Passed

Feature Report