Cucumber Reports (no 4608) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4608	09 Jan 2024, 12:05

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:28.201	Passed

Tags: @product @not_release_blocker

37.338

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.187

And I temporarily create a 4 GiB disk named "gptfat" 0.056

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.042

And I plug USB drive "gptfat" 2.428

When I start Tails Installer 21.578

Then I am told by Tails Installer that the destination device "is too small" 0.045

Hooks

After features/support/hooks.rb:291 1.011

After features/support/hooks.rb:75 0.001

Tags: @product

32.333

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.694

And I temporarily create a 7200 MiB disk named "temp" 0.050

And I start Tails Installer 21.552

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.720

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.021

Hooks

After features/support/hooks.rb:291 0.657

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.383

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.076

And I temporarily create a 7200 MiB disk named "install" 0.044

And I create a gpt partition with a vfat filesystem on disk "install" 4.173

And I plug USB drive "install" 2.417

And I install Tails to USB drive "install" by cloning 3:27.761

Then the running Tails is installed on USB drive "install" 9.827

But there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.008

After features/support/hooks.rb:75 0.106

Tags: @product

3:49.605

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.179

And I temporarily create a 7200 MiB disk named "install" 0.050

And I plug USB drive "install" 2.467

And I install Tails to USB drive "install" by cloning 3:28.623

Then the running Tails is installed on USB drive "install" 10.221

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.035

After features/support/hooks.rb:75 0.102

Tags: @product

4:26.726

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.500

And I create a file in the Persistent directory 0.092

And I temporarily create a 7200 MiB disk named "install" 0.040

And I create a gpt partition with a vfat filesystem on disk "install" 4.222

And I plug USB drive "install" 2.435

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.965

Then the running Tails is installed on USB drive "install" 12.932

And there is a persistence partition on USB drive "install" 0.080

And the USB drive "install" contains the same files as my persistent storage 3.456

Hooks

After features/support/hooks.rb:291 2.233

After features/support/hooks.rb:75 0.112

Tags: @product

3:56.025

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.024

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.447

And I install Tails to USB drive "install" by cloning 3:28.904

Then the running Tails is installed on USB drive "install" 13.521

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.461

After features/support/hooks.rb:75 0.084

Tags: @product

4:1.698

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.205

And I have started Tails from DVD without network and logged in 8.873

And I clone USB drive "__internal" to a temporary USB drive "install" 1.289

And I plug USB drive "install" 2.523

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.029

Then the running Tails is installed on USB drive "install" 10.688

And there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:291 1.073

After features/support/hooks.rb:75 0.117

Tags: @product @uefi

1:30.802

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.744

And I power off the computer 0.357

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:14.393

Then Tails is running from USB drive "__internal" 0.501

And the boot device has safe access rights 3.726

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 0.675

After features/support/hooks.rb:75 0.011

Tags: @product

1:33.606

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.757

And I plug and mount a USB drive containing a Tails USB image 28.974

And I create a 7200 MiB disk named "usbimage" 0.049

And I plug USB drive "usbimage" 2.454

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.371

Hooks

After features/support/hooks.rb:291 1.433

After features/support/hooks.rb:75 0.080

Tags: @product

1:7.682

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.337

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.836

Then Tails is running from USB drive "usbimage" 0.525

And the label of the system partition on "usbimage" is "Tails" 0.202

And the system partition on "usbimage" is an EFI system partition 0.214

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.204

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.113

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.145

And the system partition on "usbimage" has the expected flags 0.102

Hooks

After features/support/hooks.rb:291 0.631

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:28.201	Passed

Feature Report