Cucumber Reports (no 4616) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4616	12 Jan 2024, 12:20

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:18.312	Passed

Tags: @product @not_release_blocker

38.327

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.302

And I temporarily create a 4 GiB disk named "gptfat" 0.042

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.044

And I plug USB drive "gptfat" 2.434

When I start Tails Installer 22.453

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:291 1.032

After features/support/hooks.rb:75 0.005

Tags: @product

36.686

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.010

Steps

Given I have started Tails from DVD without network and logged in 8.368

And I temporarily create a 7200 MiB disk named "temp" 0.071

And I start Tails Installer 25.199

But a suitable USB device is not found 0.017

When I plug USB drive "temp" 2.738

Then the "temp" USB drive is selected 0.080

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.021

Hooks

After features/support/hooks.rb:291 0.747

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.787

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.220

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 5.053

And I plug USB drive "install" 2.422

And I install Tails to USB drive "install" by cloning 3:29.227

Then the running Tails is installed on USB drive "install" 12.716

But there is no persistence partition on USB drive "install" 0.104

Hooks

After features/support/hooks.rb:291 0.996

After features/support/hooks.rb:75 0.160

Tags: @product

3:51.493

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.700

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.489

And I install Tails to USB drive "install" by cloning 3:30.274

Then the running Tails is installed on USB drive "install" 9.920

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.312

After features/support/hooks.rb:75 0.146

Tags: @product

4:27.810

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.878

And I create a file in the Persistent directory 0.071

And I temporarily create a 7200 MiB disk named "install" 0.041

And I create a gpt partition with a vfat filesystem on disk "install" 4.091

And I plug USB drive "install" 2.474

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.545

Then the running Tails is installed on USB drive "install" 12.983

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 4.648

Hooks

After features/support/hooks.rb:291 1.857

After features/support/hooks.rb:75 0.115

Tags: @product

4:0.964

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.199

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.518

And I install Tails to USB drive "install" by cloning 3:29.544

Then the running Tails is installed on USB drive "install" 16.573

And there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.718

After features/support/hooks.rb:75 0.094

Tags: @product

4:3.652

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.097

And I have started Tails from DVD without network and logged in 9.404

And I clone USB drive "__internal" to a temporary USB drive "install" 1.233

And I plug USB drive "install" 2.469

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.991

Then the running Tails is installed on USB drive "install" 11.376

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 0.963

After features/support/hooks.rb:75 0.121

Tags: @product @uefi

1:33.680

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.944

And I power off the computer 0.337

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.940

Then Tails is running from USB drive "__internal" 0.421

And the boot device has safe access rights 3.949

And Tails has started in UEFI mode 0.060

Hooks

After features/support/hooks.rb:291 0.861

After features/support/hooks.rb:75 0.006

Tags: @product

1:55.018

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.506

And I plug and mount a USB drive containing a Tails USB image 30.835

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.450

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:13.182

Hooks

After features/support/hooks.rb:291 2.892

After features/support/hooks.rb:75 0.085

Tags: @product

1:12.891

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.199

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:11.341

Then Tails is running from USB drive "usbimage" 0.410

And the label of the system partition on "usbimage" is "Tails" 0.204

And the system partition on "usbimage" is an EFI system partition 0.247

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.192

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.083

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.106

And the system partition on "usbimage" has the expected flags 0.104

Hooks

After features/support/hooks.rb:291 0.697

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:18.312	Passed

Feature Report