Cucumber Reports (no 4620) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4620	16 Jan 2024, 12:09

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:20.777	Passed

Tags: @product @not_release_blocker

36.504

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.093

And I temporarily create a 4 GiB disk named "gptfat" 0.038

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.061

And I plug USB drive "gptfat" 2.430

When I start Tails Installer 21.825

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 1.243

After features/support/hooks.rb:75 0.001

Tags: @product

33.569

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.698

And I temporarily create a 7200 MiB disk named "temp" 0.065

And I start Tails Installer 21.779

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.723

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.178

Then a suitable USB device is not found 0.016

Hooks

After features/support/hooks.rb:291 0.649

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.855

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.084

And I temporarily create a 7200 MiB disk named "install" 0.063

And I create a gpt partition with a vfat filesystem on disk "install" 4.083

And I plug USB drive "install" 2.424

And I install Tails to USB drive "install" by cloning 3:27.821

Then the running Tails is installed on USB drive "install" 11.308

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.032

After features/support/hooks.rb:75 0.104

Tags: @product

3:50.367

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.339

And I temporarily create a 7200 MiB disk named "install" 0.067

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:28.815

Then the running Tails is installed on USB drive "install" 10.640

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.336

After features/support/hooks.rb:75 0.104

Tags: @product

4:16.411

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.014

And I create a file in the Persistent directory 0.074

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 4.105

And I plug USB drive "install" 2.414

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:38.142

Then the running Tails is installed on USB drive "install" 13.400

And there is a persistence partition on USB drive "install" 0.068

And the USB drive "install" contains the same files as my persistent storage 3.138

Hooks

After features/support/hooks.rb:291 2.160

After features/support/hooks.rb:75 0.123

Tags: @product

3:59.234

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.770

And I temporarily create a 7200 MiB disk named "install" 0.048

And I plug USB drive "install" 2.448

And I install Tails to USB drive "install" by cloning 3:32.367

Then the running Tails is installed on USB drive "install" 13.531

And there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.708

After features/support/hooks.rb:75 0.094

Tags: @product

4:0.564

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.237

And I have started Tails from DVD without network and logged in 9.231

And I clone USB drive "__internal" to a temporary USB drive "install" 1.013

And I plug USB drive "install" 2.419

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:27.749

Then the running Tails is installed on USB drive "install" 10.813

And there is no persistence partition on USB drive "install" 0.097

Hooks

After features/support/hooks.rb:291 1.045

After features/support/hooks.rb:75 0.116

Tags: @product @uefi

1:32.888

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.628

And I power off the computer 0.332

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.082

Then Tails is running from USB drive "__internal" 0.486

And the boot device has safe access rights 3.264

And Tails has started in UEFI mode 0.067

Hooks

After features/support/hooks.rb:291 0.599

After features/support/hooks.rb:75 0.006

Tags: @product

1:28.605

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.883

And I plug and mount a USB drive containing a Tails USB image 26.758

And I create a 7200 MiB disk named "usbimage" 0.050

And I plug USB drive "usbimage" 2.412

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 51.500

Hooks

After features/support/hooks.rb:291 1.255

After features/support/hooks.rb:75 0.083

Tags: @product

1:8.775

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.207

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.211

Then Tails is running from USB drive "usbimage" 0.418

And the label of the system partition on "usbimage" is "Tails" 0.219

And the system partition on "usbimage" is an EFI system partition 0.194

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.135

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.095

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.165

And the system partition on "usbimage" has the expected flags 0.126

Hooks

After features/support/hooks.rb:291 0.689

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:20.777	Passed

Feature Report