Cucumber Reports (no 4621) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4621	16 Jan 2024, 18:55

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:38.291	Passed

Tags: @product @not_release_blocker

38.464

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.198

And I temporarily create a 4 GiB disk named "gptfat" 0.046

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.388

And I plug USB drive "gptfat" 2.414

When I start Tails Installer 22.356

Then I am told by Tails Installer that the destination device "is too small" 0.060

Hooks

After features/support/hooks.rb:291 1.115

After features/support/hooks.rb:75 0.000

Tags: @product

34.126

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.473

And I temporarily create a 7200 MiB disk named "temp" 0.055

And I start Tails Installer 22.535

But a suitable USB device is not found 0.026

When I plug USB drive "temp" 2.741

Then the "temp" USB drive is selected 0.085

When I unplug USB drive "temp" 0.190

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.649

After features/support/hooks.rb:75 0.000

Tags: @product

3:56.002

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.330

And I temporarily create a 7200 MiB disk named "install" 0.625

And I create a gpt partition with a vfat filesystem on disk "install" 4.177

And I plug USB drive "install" 2.411

And I install Tails to USB drive "install" by cloning 3:28.338

Then the running Tails is installed on USB drive "install" 11.038

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.027

After features/support/hooks.rb:75 0.108

Tags: @product

3:52.179

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.651

And I temporarily create a 7200 MiB disk named "install" 0.048

And I plug USB drive "install" 2.455

And I install Tails to USB drive "install" by cloning 3:30.031

Then the running Tails is installed on USB drive "install" 10.890

But there is no persistence partition on USB drive "install" 0.102

Hooks

After features/support/hooks.rb:291 1.067

After features/support/hooks.rb:75 0.107

Tags: @product

4:17.806

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.729

And I create a file in the Persistent directory 0.079

And I temporarily create a 7200 MiB disk named "install" 0.063

And I create a gpt partition with a vfat filesystem on disk "install" 4.085

And I plug USB drive "install" 2.462

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.038

Then the running Tails is installed on USB drive "install" 14.660

And there is a persistence partition on USB drive "install" 0.078

And the USB drive "install" contains the same files as my persistent storage 3.609

Hooks

After features/support/hooks.rb:291 1.958

After features/support/hooks.rb:75 0.125

Tags: @product

4:1.038

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.409

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.525

And I install Tails to USB drive "install" by cloning 3:33.336

Then the running Tails is installed on USB drive "install" 13.648

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.494

After features/support/hooks.rb:75 0.107

Tags: @product

4:2.606

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 8.693

And I have started Tails from DVD without network and logged in 8.448

And I clone USB drive "__internal" to a temporary USB drive "install" 1.002

And I plug USB drive "install" 2.473

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:30.702

Then the running Tails is installed on USB drive "install" 11.213

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.130

After features/support/hooks.rb:75 0.116

Tags: @product @uefi

1:31.396

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.658

And I power off the computer 0.319

And the computer is set to boot in UEFI mode 0.029

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.682

Then Tails is running from USB drive "__internal" 0.360

And the boot device has safe access rights 3.262

And Tails has started in UEFI mode 0.083

Hooks

After features/support/hooks.rb:291 0.612

After features/support/hooks.rb:75 0.010

Tags: @product

1:34.574

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.725

And I plug and mount a USB drive containing a Tails USB image 29.735

And I create a 7200 MiB disk named "usbimage" 0.046

And I plug USB drive "usbimage" 2.457

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.609

Hooks

After features/support/hooks.rb:291 1.439

After features/support/hooks.rb:75 0.095

Tags: @product

1:10.096

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.159

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.615

Then Tails is running from USB drive "usbimage" 0.431

And the label of the system partition on "usbimage" is "Tails" 0.202

And the system partition on "usbimage" is an EFI system partition 0.202

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.133

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.088

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.146

And the system partition on "usbimage" has the expected flags 0.114

Hooks

After features/support/hooks.rb:291 0.666

After features/support/hooks.rb:75 0.009

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:38.291	Passed

Feature Report