Cucumber Reports (no 4624) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4624	18 Jan 2024, 23:12

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:28.164	Passed

Tags: @product @not_release_blocker

39.211

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.190

And I temporarily create a 4 GiB disk named "gptfat" 0.032

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.942

And I plug USB drive "gptfat" 2.418

When I start Tails Installer 24.565

Then I am told by Tails Installer that the destination device "is too small" 0.061

Hooks

After features/support/hooks.rb:291 0.944

After features/support/hooks.rb:75 0.001

Tags: @product

34.852

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.101

And I temporarily create a 7200 MiB disk named "temp" 0.031

And I start Tails Installer 23.691

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.722

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.177

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.693

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.650

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.368

And I temporarily create a 7200 MiB disk named "install" 0.030

And I create a gpt partition with a vfat filesystem on disk "install" 4.051

And I plug USB drive "install" 2.408

And I install Tails to USB drive "install" by cloning 3:27.917

Then the running Tails is installed on USB drive "install" 10.790

But there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.139

After features/support/hooks.rb:75 0.107

Tags: @product

3:51.353

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.433

And I temporarily create a 7200 MiB disk named "install" 0.026

And I plug USB drive "install" 2.452

And I install Tails to USB drive "install" by cloning 3:30.003

Then the running Tails is installed on USB drive "install" 10.362

But there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 1.116

After features/support/hooks.rb:75 0.104

Tags: @product

4:31.387

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.285

And I create a file in the Persistent directory 0.109

And I temporarily create a 7200 MiB disk named "install" 0.188

And I create a gpt partition with a vfat filesystem on disk "install" 4.049

And I plug USB drive "install" 2.433

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.176

Then the running Tails is installed on USB drive "install" 13.522

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 3.544

Hooks

After features/support/hooks.rb:291 2.423

After features/support/hooks.rb:75 0.140

Tags: @product

3:58.119

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.008

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.657

And I temporarily create a 7200 MiB disk named "install" 0.028

And I plug USB drive "install" 2.444

And I install Tails to USB drive "install" by cloning 3:30.697

Then the running Tails is installed on USB drive "install" 14.225

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.655

After features/support/hooks.rb:75 0.087

Tags: @product

4:3.338

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.692

And I have started Tails from DVD without network and logged in 8.497

And I clone USB drive "__internal" to a temporary USB drive "install" 1.104

And I plug USB drive "install" 2.437

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.366

Then the running Tails is installed on USB drive "install" 12.172

And there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 0.998

After features/support/hooks.rb:75 0.117

Tags: @product @uefi

1:29.280

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.360

And I power off the computer 0.636

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:14.025

Then Tails is running from USB drive "__internal" 0.425

And the boot device has safe access rights 3.753

And Tails has started in UEFI mode 0.054

Hooks

After features/support/hooks.rb:291 0.641

After features/support/hooks.rb:75 0.006

Tags: @product

1:17.482

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.135

And I plug and mount a USB drive containing a Tails USB image 26.150

And I create a 7200 MiB disk named "usbimage" 0.023

And I plug USB drive "usbimage" 2.425

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 40.747

Hooks

After features/support/hooks.rb:291 2.799

After features/support/hooks.rb:75 0.080

Tags: @product

1:9.488

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.112

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.155

Then Tails is running from USB drive "usbimage" 0.406

And the label of the system partition on "usbimage" is "Tails" 0.231

And the system partition on "usbimage" is an EFI system partition 0.131

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.179

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.068

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.083

And the system partition on "usbimage" has the expected flags 0.119

Hooks

After features/support/hooks.rb:291 0.615

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:28.164	Passed

Feature Report