Cucumber Reports (no 4626) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4626	20 Jan 2024, 12:49

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:34.865	Passed

Tags: @product @not_release_blocker

36.805

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.478

And I temporarily create a 4 GiB disk named "gptfat" 0.040

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.134

And I plug USB drive "gptfat" 2.479

When I start Tails Installer 21.628

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 0.915

After features/support/hooks.rb:75 0.001

Tags: @product

33.426

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.310

And I temporarily create a 7200 MiB disk named "temp" 0.061

And I start Tails Installer 22.043

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.693

Then the "temp" USB drive is selected 0.094

When I unplug USB drive "temp" 0.178

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.709

After features/support/hooks.rb:75 0.000

Tags: @product

3:58.632

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.114

And I temporarily create a 7200 MiB disk named "install" 0.030

And I create a gpt partition with a vfat filesystem on disk "install" 4.376

And I plug USB drive "install" 2.404

And I install Tails to USB drive "install" by cloning 3:32.655

Then the running Tails is installed on USB drive "install" 10.973

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.117

After features/support/hooks.rb:75 0.107

Tags: @product

3:51.706

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.352

And I temporarily create a 7200 MiB disk named "install" 0.023

And I plug USB drive "install" 2.495

And I install Tails to USB drive "install" by cloning 3:30.277

Then the running Tails is installed on USB drive "install" 10.477

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.207

After features/support/hooks.rb:75 0.114

Tags: @product

4:28.402

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.437

And I create a file in the Persistent directory 0.095

And I temporarily create a 7200 MiB disk named "install" 0.062

And I create a gpt partition with a vfat filesystem on disk "install" 5.072

And I plug USB drive "install" 2.405

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.364

Then the running Tails is installed on USB drive "install" 13.554

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.343

Hooks

After features/support/hooks.rb:291 1.861

After features/support/hooks.rb:75 0.116

Tags: @product

4:1.755

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.011

And I temporarily create a 7200 MiB disk named "install" 0.023

And I plug USB drive "install" 2.443

And I install Tails to USB drive "install" by cloning 3:32.219

Then the running Tails is installed on USB drive "install" 14.979

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 2.287

After features/support/hooks.rb:75 0.094

Tags: @product

4:2.025

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.660

And I have started Tails from DVD without network and logged in 8.793

And I clone USB drive "__internal" to a temporary USB drive "install" 1.336

And I plug USB drive "install" 2.417

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.670

Then the running Tails is installed on USB drive "install" 11.086

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.305

After features/support/hooks.rb:75 0.113

Tags: @product @uefi

1:29.581

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.420

And I power off the computer 0.320

And the computer is set to boot in UEFI mode 0.019

When I start Tails from USB drive "__internal" with network unplugged and I login 1:14.922

Then Tails is running from USB drive "__internal" 0.374

And the boot device has safe access rights 3.467

And Tails has started in UEFI mode 0.056

Hooks

After features/support/hooks.rb:291 0.707

After features/support/hooks.rb:75 0.006

Tags: @product

1:24.583

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.051

And I plug and mount a USB drive containing a Tails USB image 29.943

And I create a 7200 MiB disk named "usbimage" 0.026

And I plug USB drive "usbimage" 2.396

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 43.165

Hooks

After features/support/hooks.rb:291 1.078

After features/support/hooks.rb:75 0.083

Tags: @product

1:7.945

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.112

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:6.534

Then Tails is running from USB drive "usbimage" 0.370

And the label of the system partition on "usbimage" is "Tails" 0.227

And the system partition on "usbimage" is an EFI system partition 0.128

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.306

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.089

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.089

And the system partition on "usbimage" has the expected flags 0.087

Hooks

After features/support/hooks.rb:291 0.609

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:34.865	Passed

Feature Report