Cucumber Reports (no 4628) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4628	22 Jan 2024, 15:46

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:34.915	Passed

Tags: @product @not_release_blocker

35.552

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.600

And I temporarily create a 4 GiB disk named "gptfat" 0.044

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.055

And I plug USB drive "gptfat" 2.408

When I start Tails Installer 21.398

Then I am told by Tails Installer that the destination device "is too small" 0.045

Hooks

After features/support/hooks.rb:291 0.944

After features/support/hooks.rb:75 0.001

Tags: @product

33.431

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.910

And I temporarily create a 7200 MiB disk named "temp" 0.031

And I start Tails Installer 22.499

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.681

Then the "temp" USB drive is selected 0.079

When I unplug USB drive "temp" 0.187

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.691

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.205

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.940

And I temporarily create a 7200 MiB disk named "install" 0.032

And I create a gpt partition with a vfat filesystem on disk "install" 4.043

And I plug USB drive "install" 2.421

And I install Tails to USB drive "install" by cloning 3:27.990

Then the running Tails is installed on USB drive "install" 10.704

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.286

After features/support/hooks.rb:75 0.107

Tags: @product

3:52.250

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.413

And I temporarily create a 7200 MiB disk named "install" 0.043

And I plug USB drive "install" 2.497

And I install Tails to USB drive "install" by cloning 3:30.548

Then the running Tails is installed on USB drive "install" 10.667

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.243

After features/support/hooks.rb:75 0.110

Tags: @product

4:19.208

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.505

And I create a file in the Persistent directory 0.084

And I temporarily create a 7200 MiB disk named "install" 0.061

And I create a gpt partition with a vfat filesystem on disk "install" 4.067

And I plug USB drive "install" 2.499

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.473

Then the running Tails is installed on USB drive "install" 14.084

And there is a persistence partition on USB drive "install" 0.070

And the USB drive "install" contains the same files as my persistent storage 3.360

Hooks

After features/support/hooks.rb:291 1.812

After features/support/hooks.rb:75 0.114

Tags: @product

4:2.532

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.834

And I temporarily create a 7200 MiB disk named "install" 0.061

And I plug USB drive "install" 2.666

And I install Tails to USB drive "install" by cloning 3:32.903

Then the running Tails is installed on USB drive "install" 12.974

And there is no persistence partition on USB drive "install" 0.093

Hooks

After features/support/hooks.rb:291 1.626

After features/support/hooks.rb:75 0.092

Tags: @product

4:1.171

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.092

And I have started Tails from DVD without network and logged in 8.381

And I clone USB drive "__internal" to a temporary USB drive "install" 1.072

And I plug USB drive "install" 2.464

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.507

Then the running Tails is installed on USB drive "install" 10.576

And there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 0.968

After features/support/hooks.rb:75 0.116

Tags: @product @uefi

1:37.411

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.145

And I power off the computer 1.179

And the computer is set to boot in UEFI mode 0.430

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.285

Then Tails is running from USB drive "__internal" 0.422

And the boot device has safe access rights 3.888

And Tails has started in UEFI mode 0.058

Hooks

After features/support/hooks.rb:291 0.802

After features/support/hooks.rb:75 0.007

Tags: @product

2:29.443

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.220

And I plug and mount a USB drive containing a Tails USB image 30.617

And I create a 7200 MiB disk named "usbimage" 0.034

And I plug USB drive "usbimage" 2.484

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:48.086

Hooks

After features/support/hooks.rb:291 3.701

After features/support/hooks.rb:75 0.084

Tags: @product

1:10.707

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.230

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.991

Then Tails is running from USB drive "usbimage" 0.541

And the label of the system partition on "usbimage" is "Tails" 0.203

And the system partition on "usbimage" is an EFI system partition 0.200

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.198

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.140

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.106

And the system partition on "usbimage" has the expected flags 0.093

Hooks

After features/support/hooks.rb:291 0.751

After features/support/hooks.rb:75 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:34.915	Passed

Feature Report