Cucumber Reports (no 4629) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4629	22 Jan 2024, 15:45

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:17.653	Passed

Tags: @product @not_release_blocker

37.338

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.735

And I temporarily create a 4 GiB disk named "gptfat" 0.031

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.950

And I plug USB drive "gptfat" 2.468

When I start Tails Installer 22.102

Then I am told by Tails Installer that the destination device "is too small" 0.050

Hooks

After features/support/hooks.rb:291 0.974

After features/support/hooks.rb:75 0.000

Tags: @product

32.924

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.872

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 21.862

But a suitable USB device is not found 0.027

When I plug USB drive "temp" 2.800

Then the "temp" USB drive is selected 0.102

When I unplug USB drive "temp" 0.193

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.731

After features/support/hooks.rb:75 0.000

Tags: @product

3:55.005

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.714

And I temporarily create a 7200 MiB disk named "install" 0.060

And I create a gpt partition with a vfat filesystem on disk "install" 5.094

And I plug USB drive "install" 2.496

And I install Tails to USB drive "install" by cloning 3:28.824

Then the running Tails is installed on USB drive "install" 10.735

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.088

After features/support/hooks.rb:75 0.110

Tags: @product

3:49.794

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.785

And I temporarily create a 7200 MiB disk named "install" 0.028

And I plug USB drive "install" 2.451

And I install Tails to USB drive "install" by cloning 3:28.255

Then the running Tails is installed on USB drive "install" 11.195

But there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 1.098

After features/support/hooks.rb:75 0.107

Tags: @product

4:18.928

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.674

And I create a file in the Persistent directory 0.069

And I temporarily create a 7200 MiB disk named "install" 0.044

And I create a gpt partition with a vfat filesystem on disk "install" 4.029

And I plug USB drive "install" 2.439

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:43.444

Then the running Tails is installed on USB drive "install" 13.726

And there is a persistence partition on USB drive "install" 0.070

And the USB drive "install" contains the same files as my persistent storage 3.429

Hooks

After features/support/hooks.rb:291 2.271

After features/support/hooks.rb:75 0.131

Tags: @product

3:58.761

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.863

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.470

And I install Tails to USB drive "install" by cloning 3:30.581

Then the running Tails is installed on USB drive "install" 13.718

And there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.499

After features/support/hooks.rb:75 0.089

Tags: @product

4:3.042

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.930

And I have started Tails from DVD without network and logged in 8.409

And I clone USB drive "__internal" to a temporary USB drive "install" 1.319

And I plug USB drive "install" 2.441

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.493

Then the running Tails is installed on USB drive "install" 11.388

And there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.098

After features/support/hooks.rb:75 0.122

Tags: @product @uefi

1:33.452

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.808

And I power off the computer 0.321

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:18.221

Then Tails is running from USB drive "__internal" 0.363

And the boot device has safe access rights 3.631

And Tails has started in UEFI mode 0.077

Hooks

After features/support/hooks.rb:291 0.715

After features/support/hooks.rb:75 0.007

Tags: @product

2:17.008

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.084

And I plug and mount a USB drive containing a Tails USB image 33.396

And I create a 7200 MiB disk named "usbimage" 0.334

And I plug USB drive "usbimage" 2.452

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:32.740

Hooks

After features/support/hooks.rb:291 2.135

After features/support/hooks.rb:75 0.083

Tags: @product

1:11.395

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.185

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.847

Then Tails is running from USB drive "usbimage" 0.413

And the label of the system partition on "usbimage" is "Tails" 0.244

And the system partition on "usbimage" is an EFI system partition 0.200

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.173

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.094

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.141

And the system partition on "usbimage" has the expected flags 0.093

Hooks

After features/support/hooks.rb:291 0.745

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:17.653	Passed

Feature Report