Cucumber Reports (no 4632) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4632	24 Jan 2024, 13:39

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:38.654	Passed

Tags: @product @not_release_blocker

38.843

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.224

And I temporarily create a 4 GiB disk named "gptfat" 0.074

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.159

And I plug USB drive "gptfat" 2.566

When I start Tails Installer 21.778

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:291 1.063

After features/support/hooks.rb:75 0.001

Tags: @product

33.490

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.065

And I temporarily create a 7200 MiB disk named "temp" 0.061

And I start Tails Installer 22.324

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.729

Then the "temp" USB drive is selected 0.076

When I unplug USB drive "temp" 0.188

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.669

After features/support/hooks.rb:75 0.000

Tags: @product

3:55.130

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.014

And I temporarily create a 7200 MiB disk named "install" 0.074

And I create a gpt partition with a vfat filesystem on disk "install" 4.250

And I plug USB drive "install" 2.429

And I install Tails to USB drive "install" by cloning 3:29.529

Then the running Tails is installed on USB drive "install" 10.739

But there is no persistence partition on USB drive "install" 0.092

Hooks

After features/support/hooks.rb:291 1.114

After features/support/hooks.rb:75 0.109

Tags: @product

3:53.892

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.113

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.507

And I install Tails to USB drive "install" by cloning 3:29.641

Then the running Tails is installed on USB drive "install" 12.506

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.003

After features/support/hooks.rb:75 0.122

Tags: @product

4:31.833

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.588

And I create a file in the Persistent directory 0.119

And I temporarily create a 7200 MiB disk named "install" 0.051

And I create a gpt partition with a vfat filesystem on disk "install" 5.141

And I plug USB drive "install" 2.472

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.613

Then the running Tails is installed on USB drive "install" 13.225

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 3.551

Hooks

After features/support/hooks.rb:291 2.122

After features/support/hooks.rb:75 0.121

Tags: @product

3:58.439

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.198

And I temporarily create a 7200 MiB disk named "install" 0.052

And I plug USB drive "install" 2.448

And I install Tails to USB drive "install" by cloning 3:31.041

Then the running Tails is installed on USB drive "install" 14.598

And there is no persistence partition on USB drive "install" 0.101

Hooks

After features/support/hooks.rb:291 1.496

After features/support/hooks.rb:75 0.202

Tags: @product

4:2.873

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.014

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.180

And I have started Tails from DVD without network and logged in 8.284

And I clone USB drive "__internal" to a temporary USB drive "install" 1.162

And I plug USB drive "install" 2.490

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.328

Then the running Tails is installed on USB drive "install" 11.352

And there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 1.192

After features/support/hooks.rb:75 0.123

Tags: @product @uefi

1:34.929

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.901

And I power off the computer 0.344

And the computer is set to boot in UEFI mode 0.040

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.455

Then Tails is running from USB drive "__internal" 0.457

And the boot device has safe access rights 3.654

And Tails has started in UEFI mode 0.075

Hooks

After features/support/hooks.rb:291 0.892

After features/support/hooks.rb:75 0.008

Tags: @product

2:19.560

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.515

And I plug and mount a USB drive containing a Tails USB image 29.434

And I create a 7200 MiB disk named "usbimage" 0.045

And I plug USB drive "usbimage" 2.466

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:39.097

Hooks

After features/support/hooks.rb:291 2.889

After features/support/hooks.rb:75 0.083

Tags: @product

1:9.660

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.183

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.743

Then Tails is running from USB drive "usbimage" 0.535

And the label of the system partition on "usbimage" is "Tails" 0.242

And the system partition on "usbimage" is an EFI system partition 0.410

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.235

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.091

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.118

And the system partition on "usbimage" has the expected flags 0.098

Hooks

After features/support/hooks.rb:291 0.805

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:38.654	Passed

Feature Report