Cucumber Reports (no 4634) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4634	24 Jan 2024, 17:24

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:55.675	Passed

Tags: @product @not_release_blocker

35.997

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.763

And I temporarily create a 4 GiB disk named "gptfat" 0.035

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.982

And I plug USB drive "gptfat" 2.406

When I start Tails Installer 21.768

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:291 0.834

After features/support/hooks.rb:75 0.001

Tags: @product

33.261

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.265

And I temporarily create a 7200 MiB disk named "temp" 0.026

And I start Tails Installer 21.958

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.695

Then the "temp" USB drive is selected 0.084

When I unplug USB drive "temp" 0.182

Then a suitable USB device is not found 0.027

Hooks

After features/support/hooks.rb:291 0.628

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.961

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.397

And I temporarily create a 7200 MiB disk named "install" 0.031

And I create a gpt partition with a vfat filesystem on disk "install" 4.025

And I plug USB drive "install" 2.437

And I install Tails to USB drive "install" by cloning 3:28.934

Then the running Tails is installed on USB drive "install" 10.048

But there is no persistence partition on USB drive "install" 0.085

Hooks

After features/support/hooks.rb:291 1.289

After features/support/hooks.rb:75 0.105

Tags: @product

4:35.411

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.837

And I temporarily create a 7200 MiB disk named "install" 0.025

And I plug USB drive "install" 2.453

And I install Tails to USB drive "install" by cloning 4:14.227

Then the running Tails is installed on USB drive "install" 10.796

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.095

After features/support/hooks.rb:75 0.106

Tags: @product

5:21.833

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:3.106

And I create a file in the Persistent directory 0.097

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 5.410

And I plug USB drive "install" 2.522

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:55.103

Then the running Tails is installed on USB drive "install" 11.910

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 3.554

Hooks

After features/support/hooks.rb:291 1.828

After features/support/hooks.rb:75 0.116

Tags: @product

3:56.250

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.140

And I temporarily create a 7200 MiB disk named "install" 0.027

And I plug USB drive "install" 2.436

And I install Tails to USB drive "install" by cloning 3:29.967

Then the running Tails is installed on USB drive "install" 12.610

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.492

After features/support/hooks.rb:75 0.098

Tags: @product

4:3.120

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.563

And I have started Tails from DVD without network and logged in 9.934

And I clone USB drive "__internal" to a temporary USB drive "install" 1.080

And I plug USB drive "install" 2.420

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.114

Then the running Tails is installed on USB drive "install" 10.951

And there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.053

After features/support/hooks.rb:75 0.114

Tags: @product @uefi

1:27.416

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.081

And I power off the computer 0.319

And the computer is set to boot in UEFI mode 0.019

When I start Tails from USB drive "__internal" with network unplugged and I login 1:13.101

Then Tails is running from USB drive "__internal" 0.479

And the boot device has safe access rights 3.359

And Tails has started in UEFI mode 0.055

Hooks

After features/support/hooks.rb:291 0.605

After features/support/hooks.rb:75 0.007

Tags: @product

1:21.349

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.001

Steps

Given I have started Tails from DVD without network and logged in 8.089

And I plug and mount a USB drive containing a Tails USB image 27.683

And I create a 7200 MiB disk named "usbimage" 0.034

And I plug USB drive "usbimage" 2.436

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 43.105

Hooks

After features/support/hooks.rb:291 1.944

After features/support/hooks.rb:75 0.083

Tags: @product

1:7.072

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.144

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.696

Then Tails is running from USB drive "usbimage" 0.386

And the label of the system partition on "usbimage" is "Tails" 0.205

And the system partition on "usbimage" is an EFI system partition 0.173

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.151

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.083

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.104

And the system partition on "usbimage" has the expected flags 0.126

Hooks

After features/support/hooks.rb:291 0.776

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:55.675	Passed

Feature Report